NEC LCD1980SXI manual Tag4

Appendix –continued

Tag 3

Signal		Determines when the auto adjust is performed. The choices are
(Analog input only)		ÒOFFÓ, ÒSIMPLEÓ and ÒFULLÓ. Press Ò+Ó or Ò-Ó to select.
	Signal		Input Signal		Adjustment Items
	Setting
			New signal	Re-input	"H-size" "Fine" "H/V-Position"	Contrast
		OFF	O	X	*	X
		SIMPLE	O	O	*	X
		FULL	O	O	*	*

O : Automatic adjustment is performed on adjustments marked with *.

X : Automatic adjustment is not performed.

NOTE: Automatic adjustment does not work at a resolution lower than 800x600.

Auto SW	Determines which items are adjusted. The choices are ÒSIMPLEÓ,
(Analog input only)	ÒFULLÓ, and ÒDETAILÓ. Press Ò+Ó or Ò-Ó to select. See table below.

Sets the ÒAuto Adjust LevelÓ as shown in the table below.

	"Size" "Fine"	"Contrast"	Black level,	Time
	"Position"		Long cable capability *1
SIMPLE	O	X	X	1.5 seconds
FULL	O	O	X	2 seconds
DETAIL	O	O	O	10 to 20 seconds

O : Automatic adjustment is performed.

X : Automatic adjustment is not performed.

*1: Black level, RGB sharpness, RGB delay and RGB position are adjusted using the Long Cable Software. To download the software, please visit our website at www.necmitsubishi.com.

Tag4

Auto	Automatically adjusts the Image Position and H. Size (or V. Size)
(Analog input only)	settings and Fine settings. Press ÒSELECTÓ to activate Auto Adjustment.
H. Position	Controls Horizontal Image Position within the display area of the LCD.
	Press Ò+Ó or Ò-Ó to adjust.
V. Position	Controls Vertical Image Position within the display area of the LCD.
	Press Ò+Ó or Ò-Ó to adjust.
H. Size	Adjusts the horizontal (or vertical) size of the screen. If the
(OSM Rotation: Landscape)	ÒAUTO Adjust functionÓ does not provide a satisfactory picture
V. Size	setting, a further tuning can be manually performed using the ÒH.Size
(OSM Rotation: Portrait)	(or V.Size)Ó a further tuning can be manually performed using the
(Analog input only)	ÒH.Size (or V.Size)Ó function (dot clock). For this a MoirŽ test pattern
	could be used. This function may alter the width of the picture. Use
	left/Right Menu to center the image on the screen. If the H.Size (or
	V.Size) is wrongly calibrated, the result would look like on the left
	drawing. The image should be homogeneous.
	50

LCD1980SXimanual060704.p65 50 6/10/04, 9:28 AM