NEC LCD1980SXI manual Screen Rotation, Tilt, Swivel

Quick Start –continued

Screen Rotation

Before rotating, the screen must be raised to the highest level to avoid knocking the screen on the desk or pinching your fingers. To raise the screen, place hands on each side of the monitor and lift up to the highest position (Figure RL.1).

To rotate screen, place hands on each side of the monitor screen and turn clockwise from Landscape to Portrait or counter-clockwise from Portrait to Landscape (Figure R.1).

To toggle the orientation of the OSM menu between Landscape and Portrait modes, refer to the ÒControlsÓ section, ÒOSM RotationÓ function.

NOTE: If the screen is rotated counterclockwise, the tilt function is not available. Rotate the screen 90û clockwise until you hear one click.

Figure R.1

Tilt

Grasp top and bottom sides of the monitor screen with your hands and adjust the tilt as desired (Figure TS.1).

Swivel

Grasp both sides of the monitor screen with your hands and adjust the swivel as desired (Figure TS.2).

NOTE: Handle with care when tilting the monitor screen.

NOTE: If the tilt function is not available, rotate the screen 90û clockwise until you

hear one click.

5

LCD1980SXimanual060704.p65 5 6/10/04, 9:28 AM