NEC LCD1990FXp LED Brightness, LED Color, Screen Saver, Motion, Hot Key, Factory Preset, Language

Advanced OSM Controls – continued

Tag 5	LED BRIGHTNESS	Controls the brightness of the LED on the front of the
		monitor.
	LED COLOR	The LED on the front can be blue or green.
	SCREEN SAVER	Use the SCREEN SAVER to reduce the risk of image persistence.
	MOTION	The screen image moves periodically in 4 directions to reduce
		the risk of image persistence. The SCREEN SAVER can be set
		to move the screen image in intervals ranging from 10 to 900
		seconds, in 10-second increments.
	HOT KEY	When this function is activated, the brightness and contrast of
		the monitor can be adjusted without entering the OSM menu by
		using the front buttons.
		The “Left” or “Right” buttons adjust the brightness level.
		The “Down” or Up” buttons adjust the contrast level.
	FACTORY PRESET	Selecting the factory preset allows the user to reset most of the
		OSM control settings back to the factory settings.
		Individual settings can be reset by highlighting the control need-
		ing to be reset, and pressing the RESET button.
Tag 6	LANGUAGE	OSM control menus are available in eight languages. Press
		“Left” or “Right” to select.
	OSM H.POSITION	You can choose where you would like the OSM control image
		to appear on your screen. Selecting OSM Position allows you
		to manually adjust the location of the OSM control menu left, or
		right.
	OSM V.POSITION	You can choose where you would like the OSM control image
		to appear on your screen. Selecting OSM Position allows you
		to manually adjust the location of the OSM control menu up, or
		down.
	OSM TURN OFF	The OSM control menu will stay on as long as it is in use.
		You can select how long the monitor waits after the last touch of
		a button to shut off the OSM control menu. The preset choices
		are 10-120 seconds by 5 seconds increments. Press “Left” or
		“Right” to select.
	OSM LOCK OUT	This control completely locks out access to all OSM control
		functions. When attempting to activate OSM controls while in
		the Lock Out mode, a screen will appear indicating the OSM
		controls are locked out.
		There are four ways to use OSM LOCK OUT function:
		1: OSM LOCK OUT with BRIGHTNESS and CONTRAST
		control: This mode locks all OSM functions except for
		BRIGHTNESS and CONTRAST.
		To activate, press the SELECT and “Up” buttons
		simultaneously, while in the OSM menu.
		To deactivate, press the SELECT and “Up” buttons
		simultaneously, while in the OSM menu.

19