NEC LCD1701 user manual Tilt and Swivel, Remove Monitor Stand for Mounting, English-5

Tilt and Swivel

Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1.Disconnect all cables.

2.Place monitor face down on a non-abrasive surface (Figure R.1).

3.Remove the hinge cover (Figure R.1).

4.Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure R.2) the monitor is now ready for mounting in an alternate manner.

5.Connect the AC cord and signal cable to the back of the monitor (Figure R.3).

6.Reverse this process to reattach stand.

NOTE: Use only VESA-compatible alternative mounting method.

Handle with care when removing monitor stand.

Figure TS.1

English

Hinge cover

Non-abrasive surface

Figure R.1

English-5