Quick Start, Figure A.1 | NEC LCD2000 guide

Quick Start

To attach the MultiSync® LCD monitor to your system, follow these instructions:

1.Turn off the power to your computer.

2.For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable

to the connector of the display card in your system (Figure A.1). Tighten all screws.

For the Mac: Connect the MultiSync LCD400™ or MultiSync LCD2000™ Macintosh cable adapter to the computer (Figure B.1). Attach the 15-pin mini D-SUB end of the appropriate signal cable to the MultiSync LCD400 or MultiSync LCD2000 Macintosh cable adapter (Figure B.1). Tighten all screws.

NOTE: To obtain the MultiSync LCD400 or MultiSync LCD2000 Macintosh cable adapter, call NEC Technologies at (800) 820-1230.

3.For the MultiSync LCD400: Connect the 15-pin mini D-SUB of the video signal cable to the appropriate connector on the back of the monitor (Figure C1). For the MultiSync LCD2000: Connect the BNC cables to the appropriate connectors on the back of the monitor. Connect the red BNC cable to the BNC connector on the monitor labeled R, the green BNC cable to the BNC connector labeled G/Sync, the blue BNC cable to the BNC connector labeled B. If you have a fourth BNC connector (Composite Sync), connect it to the BNC connector on the monitor labeled H/CS. If you have a fifth BNC connector (Vertical Sync), connect it to the BNC connector on the monitor labeled VS (Figure D.1).

NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module and/or shorten the module’s life.

4.Connect one end of the power cord to the MultiSync LCD Series monitor and the other end to the power outlet (Figure E.1).

5.Turn on the monitor (Figure F.1) and the computer.

6.To complete the setup of your MultiSync LCD monitor, use the following OSM™ controls:

•Auto Adjust Contrast

•Auto Adjust

•Image Adjust – Fine (MultiSync LCD2000 monitor only)

Refer to the Controls section of this User’s Manual for a full description of these OSM controls.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

	15-pin
	mini D-SUB
	15-pin
	mini
	D-SUB
	Mac Adapter
	(not included)
Figure A.1	Figure B.1
	2

78132391

5/5/98, 8:34 AM