NEC LCD2000 user manual Controls, Brightness and Contrast, Auto Adjust, Position, Image Adjust

Page 6

Controls

OSM(On-Screen-Manager) Controls

The OSM controls on the front of the monitor function as follows:

Control

Main Menu

Sub-Menu

EXIT

Exits the OSM controls.

Exits to the OSM controls

 

 

main menu.

CONTROL /

Moves the highlighted

Moves the highlighted area

 

area up/down to select

up/down to select one of the

 

one of the controls.

controls.

CONTROL –/+

Has no function.

Moves the bar in the + or –

 

 

direction to increase or

 

 

decrease the adjustment.

PROCEED

Proceeds to the selected

Activates Auto Adjust feature.

 

menu choice (indicated

In Display Mode, opens

 

by the highlighted area).

additional window.

RESET: The currently

Resets all the controls within

Resets the highlighted control.

highlighted control to

the highlighted menu.

 

the factory setting.

 

NOTE: When RESET is pressed, a warning window will appear

 

allowing you to cancel the reset function.

Brightness and Contrast

Brightness:

Adjusts the overall image and background screen brightness.

Contrast:

Adjusts the image brightness in relation to the background.

Auto Adjust Contrast: Corrects the image displayed for non-standard video inputs.

Auto Adjust

MultiSync® LCD400monitor: Allows automatic adjustment of the Position and Image Adjust controls.

MultiSync® LCD2000monitor: Allows automatic adjustment of the Position and Image Adjust Coarse control.

Position

Controls horizontal and vertical image position within the display area of the LCD.

Auto Adjust Position: Automatically sets the horizontal and vertical image position within the display area of the LCD.

Image Adjust

Coarse: Adjusts the horizontal size by increasing or decreasing the Coarse setting.

Fine: Improves focus, clarity and image stability by increasing or decreasing the Fine setting.

NOTE: The Image Adjust Fine control must be used to complete the setup of your MultiSync LCD2000 monitor.

Auto Adjust Coarse/Fine: (MultiSync LCD400 monitor only) Automatically adjusts the Coarse or Fine settings.

Auto Adjust Coarse: (MultiSync LCD2000 monitor only) Automatically adjusts the Coarse setting.

4

78132391

6

5/5/98, 8:34 AM

Image 6
Contents MultiSync Canadian Department of Communications Compliance Statement FCC InformationContents Quick Start Figure A.1Quick Start Controls Auto AdjustImage Adjust Brightness and ContrastAccuColor Control System Display ModeFactory Preset OSM LocationSafety Precautions and Maintenance Recommended Use78132391 98, 834 AM Specifications Monitor MultiSync LCD400 SpecificationsMonitor MultiSync LCD2000 Specifications Native Resolution Pixel Count 1280 xFeatures Troubleshooting FastFacts Information 800 References508 Literature & Sales Info NEC-INFO 800 MultiSync FulfillmentLimited Warranty Declaration of Conformity