NEC X461S, X551S user manual Display Protection, English-24

Page 26

LAN SETTING

When you use this function, EXTERNAL CONTROL should be “LAN”.

 

 

 

NOTE: When changing the LAN SETTING, turn the monitor off and then back on.

 

 

 

After turning on the monitor, you need to wait several seconds until the LAN SETTING is applied.

 

 

 

 

 

 

DHCP

Enabling this option automatically assigns an IP address to the monitor from your DHCP server.

DISABLE

 

 

Disabling this option allows you to register the IP address or subnet mask number obtained from

 

 

 

your network administrator.

 

 

 

NOTE: Consult your network administrator for the IP address when “ENABLE” is selected for

 

 

 

[DHCP].

 

 

 

 

 

 

IP ADDRESS

Set your IP address of the network connected to the monitor when “DISABLE” is selected for

192.168.0.10

 

 

[DHCP].

 

 

 

 

 

 

SUBNET MASK

Set your subnet mask number of the network connected to the monitor when “DISABLE” is

255.255.255.0

 

 

selected for [DHCP].

 

 

 

 

 

 

DEFAULT GATEWAY

Set your default gateway of the network connected to the monitor when “DISABLE” is selected

192.168.0.1

 

 

for [DHCP].

 

 

 

 

 

 

DNS PRIMARY

Set your primary DNS settings of the network connected to the monitor.

0.0.0.0

 

 

 

 

 

DNS SECONDARY

Set your secondary DNS settings of the network connected to the monitor.

0.0.0.0

 

 

 

 

SETTING COPY

In a daisy chain scenario, select the OSD menu categories that you want to copy over to the

NO

 

 

other monitor.

 

 

 

NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C”. This function

 

 

 

resets to default when power is off. This function has a limit depending on the cable you use.

 

 

 

 

 

 

COPY START

Select “YES” and press the SET button to start copying.

 

 

 

 

 

 

ALL INPUT

All input terminals settings are copied when you select this item. Default is off.

 

 

 

 

 

RESET

Resets “MULTI DISPLAY” options back to factory settings except LAN SETTING.

-

 

 

 

 

DISPLAY PROTECTION

 

POWER SAVE

Sets how long the monitor waits to go into power save mode after the signal is lost.

ON

 

 

Note: When connecting DVI, the video card might not stop sending the digital data even

 

 

 

though the image might have disappeared. If this occurs the monitor will not switch into power

 

 

 

management mode.

 

 

 

 

HEAT STATUS

Displays status of the FAN, BACKLIGHT and TEMPERATURE.

-

 

 

 

FAN CONTROL

Cooling fan reduces the temperature of the display to protect from overheating.

AUTO

 

 

If “AUTO” is selected, you can adjust the start temperature of the cooling fan and fan speed.

 

 

 

 

SCREEN SAVER

Use the SCREEN SAVER function to reduce the risk of Image Persistence.

 

 

 

 

 

 

GAMMA

The display gamma is changed and fi xed when “ON” is selected.

OFF

 

 

 

 

 

BACKLIGHT

The brightness of backlight is decreased when “ON” is selected.

OFF

 

 

NOTE: Do not select this function when picture mode is AMBIENT1 or AMBIENT2.

 

 

 

 

 

 

MOTION

The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT) at

OFF

 

 

user determined intervals. You can set interval time and zooming ratio.

 

 

 

This function is disabled when PIP, STILL, TEXT TICKER or TILE MATRIX are enabled.

 

 

 

 

 

SIDE BORDER COLOR

Adjusts the color of the side borders when a 4:3 image is displayed.

15

 

 

Press + button, the bar will become lighter.

 

 

 

Press - button, the bar will become darker.

 

 

 

 

AUTO BRIGHTNESS

Adjusts the brightness level according to the input signal.

OFF

DPORT, DVI, VGA inputs only

NOTE: Do not select this function when picture mode is AMBIENT1 or AMBIENT2.

 

 

 

 

 

 

 

CHANGE SECURITY

Allows the security password to be changed.

-

PASSWORD

The factory preset password is 0000.

 

 

 

 

SECURITY

Locks the security password.

OFF

 

 

 

DDC/CI

ENABLE/DISABLE: Turns ON or OFF the two way communication and control of the monitor.

ENABLE

 

 

 

ALERT MAIL

Selects whether or not to send an e-mail notifi cation of monitor error via wired LAN.

OFF

 

 

 

RESET

Resets the following settings within the DISPLAY PROTECTION menu back to factory

-

 

 

setting: POWER SAVE, FAN CONTROL, SCREEN SAVER, SIDE BORDER COLOR, AUTO

 

 

 

BRIGHTNESS, DDC/CI.

 

 

 

 

 

 

 

 

 

English-24

Image 26
Contents MultiSync X461S MultiSync X551S Index Advanced OptionFor Canada Declaration of conformityFor USA Declaration of the Manufacturer Important InformationDeclaration English-2Recommended Use Cleaning the LCD PanelCleaning the Cabinet ErgonomicsContents Mounting InstallationPlease note the following when mounting on wall or ceiling OrientationAttaching Mounting Accessories Ventilation Requirements Using Wall Mount AdapterInstalling and removing optional table top stand Prevent TippingParts Name and Functions Control PanelTerminal Panel Wireless Remote Control Operating Range for the Remote Control Handling the remote controlInstall the remote control batteries SetupDetermine the installation location Connect the supplied power cordAdjust the screen See pages 20 Switch on the power of all the attached external equipmentAdjust the sound Adjust the image SeeBefore making connections Wiring DiagramConnections English-14Connecting a Computer with DisplayPort Connecting a Personal ComputerConnecting a DVD Player or Computer with Hdmi out English-15English-16 Power on and OFF ModesBasic Operation OFFSelecting a video source Power IndicatorUsing Power Management Picture AspectAmbient parameter setting Picture ModeAmbient Mode Information OSDOSD On-Screen-Display Controls English-19English-20 AdjustPicture English-21 AudioSchedule English-22 PIPOSD Multi Display English-23Display Protection English-24Advanced Option English-25English-26 English-27 Image Sticking of LCD PanelRecommendations Remote Control Function English-28English-29 Connection English-30Controlling the LCD monitor via LAN Control Connecting to a NetworkNetwork Setting by Using an Http Browser OverviewHandling of the Address for Operation via a Browser Network SettingsPreparation Before Use English-32Alert Mail Setting English-33CONTROL-COOLING FAN = Auto English-34OSD Display PROTECTION-FAN Features English-35Troubleshooting English-36English-37 Specifications X461SProduct Specifications Specifications X551S English-38Pin Assignment English-39Energy Saving Manufacturer’s Recycling and Energy InformationDisposing of your old NEC product Weee Mark European Directive 2002/96/EC

X461S, X551S specifications

The NEC X551S and X461S are high-performance professional large format displays designed to deliver exceptional picture quality and reliable performance for various commercial applications. Both models are perfect for environments such as retail spaces, conference rooms, airports, and digital signage.

The NEC X551S features a 55-inch screen with a resolution of 1920 x 1080 pixels, providing stunning full HD visuals. Similarly, the X461S boasts a 46-inch display with the same resolution, ensuring clarity and detail across both models. The high brightness levels of up to 700 cd/m² for the X551S and 450 cd/m² for the X461S enhance visibility in well-lit environments, making them ideal for outdoor installations or brightly lit areas.

One of the standout characteristics of the NEC displays is their advanced technology. The X551S and X461S utilize an LED backlight system, which not only improves energy efficiency but also enhances color rendition and overall picture quality. The displays feature a wide viewing angle, ensuring that images remain vibrant and clear from various perspectives. This is essential for delivering content to a larger audience without sacrificing quality.

In terms of connectivity, both models come equipped with multiple input options, including HDMI, DisplayPort, and DVI-D, allowing for flexible integration with various media sources. Additionally, the NEC X551S and X461S support NEC’s extensive range of optional accessories, including multi-display solutions, which enable users to create larger video walls for even more impactful presentations.

The displays are built to operate for extended periods, with a rated lifespan of up to 50,000 hours, making them a reliable choice for continuous use. Both models also include built-in cooling systems to maintain optimal operating temperatures, ensuring consistent performance even in demanding environments.

Moreover, the NEC X551S and X461S come with comprehensive warranty options and support services, further enhancing their appeal for business applications. Their sleek, professional design compliments any setting and provides a touch of sophistication.

In summary, the NEC X551S and X461S are excellent choices for users looking for high-quality, reliable, and versatile displays that meet the demands of commercial use, while offering advanced features and technologies to ensure outstanding performance.