NEC X551S, X461S user manual Advanced Option, English-25

ADVANCED OPTION

INPUT DETECT		Selects the method of input detection the monitor uses when more than two input devices are	NONE
		connected.
		The Monitor will not search the other video input ports.
	NONE
	FIRST DETECT	When the current video input signal is not present, then the monitor searches for a video signal
		from the other video input port. If the video signal is present in the other port, then the monitor
		switches the video source input port to the new found video source automatically.
		The monitor will not look for other video signals while the current video source is present.
	LAST DETECT	When the monitor is displaying a signal from the current source and a new secondary source
		is supplied to the monitor, the monitor will automatically switch to the new video source. When
		current video input signal is not present, the monitor searches for a video signal from the other
		video input port. If the video signal is present in the other port, then the monitor switches the
		video source input port to the new found video source automatically.
	VIDEO DETECT	DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO inputs will have priority over DVI, VGA. When
		DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO input signal is present the monitor will change
		and keep to the DVD/HD, SCART, VIDEO1, VIDEO2 or S-VIDEO input.
	CUSTOM DETECT	Set the priority of input signals.
		When CUSTOM DETECT is selected, monitor searches listed inputs only.
INPUT CHANGE		Sets input change speed.	NORMAL
		NOTE: When “QUICK” is selected, picture may be distorted when signal input is changed.
		This function should be chosen after all adjustment options have been made for the input.
TERMINAL SETTING
	DVI MODE	Selects the kind of DVI-D equipment which is connected to the DVI input. Select “DVI-PC” when	DVI-PC
		PC or other computer equipment is connected. Select “DVI-HD” when DVD player, which has
		DVI-D output, is connected.
	D-SUB MODE	Selects the type of signal associated with the D-SUB input.	RGB
		RGB: Analog input (R, G, B, H, V)
		COMPONENT: Component (Y, Cb/Pb, Cr/Pr)
		SCART: SCART signal
		VIDEO: Composite video (VIDEO2)
		S-VIDEO:
	HDMI SIGNAL	RAW: Disable the expanded feature.	EXPAND
		EXPAND: Expand image contrast and increase detail in the dark and bright areas.
DEINTERLACE		Selects the IP (Interlace to Progressive) conversion function.	ON
		Note: For DVI input “DVI-HD” needs to be enabled in the DVI mode menu.
		Converts interlaced signals to progressive. This is the default setting.
	ON
	OFF	Disables IP conversion. This setting is best suited for motion pictures, but increases the risk of
		image retention.
COLOR SYSTEM		The selected Color System depends on the video format of the input signal.	AUTO
VIDEO1, VIDEO2, S-VIDEO inputs only
		Automatically chooses Color System setting based on input signal.
	AUTO
	NTSC
	PAL
	SECAM
	4.43 NTSC
	PAL-60

English

English-25