NEC X461S, X551S user manual Remote Control Function, English-28

Page 30

Remote Control Function

REMOTE CONTROL ID FUNCTION

REMOTE CONTROL ID

The remote control can be used to control up to 100 individual MultiSync monitors using what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors. For example: if there are many monitors being used in the same area, a remote control in normal mode would send signals to every monitor at the same time (see Figure 1). Using the remote in REMOTE CONTROL ID mode will only operate one specifi c monitor within the group (see Figure 2).

TO SET REMOTE CONTROL ID

While holding down the REMOTE ID SET button on the remote control, use the KEYPAD to input the Monitor ID (1-100) of the display to be controlled via remote. The remote can then be used to operate the monitor having that specifi c Monitor ID number.

When 0 is selected or when the remote control is in normal mode, all monitors will be operated.

Monitor ID:1

Monitor ID:2

Monitor ID:3

Remote works

Remote works

Remote works

Figure 1

Remote in

Normal mode or the REMOTE ID is set to 0

Monitor ID:1

Monitor ID:2

Monitor ID:3

TO SET/RESET REMOTE CONTROL MODE

ID Mode - To enter ID Mode press the REMOTE ID SET button and hold down for 2 seconds.

Normal Mode - To return to Normal Mode press the REMOTE ID CLEAR button and hold down for 2 seconds.

In order for this feature to work properly, the display must be assigned a Monitor ID number. The Monitor ID number can be assigned under the MULTI DISPLAY menu in the OSD (See page 23).

Point the remote control towards the remote sensor of the desired monitor and press the REMOTE ID SET button. The MONITOR ID number is shown on the display when your remote control is in ID mode.

Remote does

Remote does

Remote works

not work

not work

 

Figure 2

Remote set up

to use REMOTE

ID:3

Use the remote control to operate a monitor that has a specific MONITOR ID number assigned to it.

1.Set the MONITOR ID number for the display (See page 23). The MONITOR ID number can range from 1-100.

This MONITOR ID number allows the remote control to operate this specifi c monitor without affecting other monitors.

2.On the remote control, press and hold down the REMOTE ID SET button while using the keypad to input the REMOTE CONTROL ID number (1-100). The REMOTE ID NUMBER should match the MONITOR ID number of the display to be controlled. Choose “0” to simultaneously control all displays in range.

3.Point the remote control towards the remote sensor of the desired monitor and press the REMOTE ID SET button. The MONITOR ID number is shown in red on the display.

If the REMOTE CONTROLID is “0”, then all displays in range will show their respective MONITOR ID number in red.

If the MONITOR ID number is shown in white on the display, the MONITOR ID number and the REMOTE CONTROL ID are not the same.

This LCD monitor can be controlled via personal computer or wireless remote control using an RS-232C connection.

MONITOR ID and IR CONTROL

Using one PC or one infrared wireless controller, up to 100 individual LCD monitors can be controlled through a daisy chain via RS-232C connection.

1.Connect PC and LCD monitors.

Connect a PC’s RS-232C control output to the LCD monitor RS-232C input. You can then connect the RS-232C output from the LCD monitor to another LCD monitor RS-232C input. Up to 100 monitors can be connected using RS-232C.

2.Set Monitor ID and IR Control mode.

For proper operation, the Monitor ID should be set in the OSD menu of each monitor that is in the chain. The Monitor ID can be set under the “MULTI DISPLAY” menu in the OSD. The Monitor ID number can be set within a range from 1 to 100. No two monitors should share the same Monitor ID number. It is recommended to number each monitor in a daisy chain sequentially from 1. The fi rst monitor in the daisy chain is designated as the primary monitor. Subsequent monitors with the chain are secondary monitors.

In the “ADVANCED OPTION” menu on the fi rst monitor in the RS-232C daisy chain set the “IR CONTROL” to “PRIMARY”. Set the “IR CONTROL” to “SECONDARY” on all other monitors.

English-28

Page 29 Page 31
Image 30
Page 29 Page 31
Contents MultiSync X461S MultiSync X551S Index Advanced OptionDeclaration of conformity For USAFor Canada Declaration of the Manufacturer Important InformationDeclaration English-2Recommended Use Cleaning the LCD PanelCleaning the Cabinet ErgonomicsContents Mounting InstallationPlease note the following when mounting on wall or ceiling OrientationAttaching Mounting Accessories Ventilation Requirements Using Wall Mount AdapterInstalling and removing optional table top stand Prevent TippingParts Name and Functions Control PanelTerminal Panel Wireless Remote Control Operating Range for the Remote Control Handling the remote controlInstall the remote control batteries SetupDetermine the installation location Connect the supplied power cordAdjust the screen See pages 20 Switch on the power of all the attached external equipmentAdjust the sound Adjust the image SeeBefore making connections Wiring DiagramConnections English-14Connecting a Computer with DisplayPort Connecting a Personal ComputerConnecting a DVD Player or Computer with Hdmi out English-15English-16 Power on and OFF ModesBasic Operation OFFSelecting a video source Power IndicatorUsing Power Management Picture AspectAmbient parameter setting Picture ModeAmbient Mode Information OSDOSD On-Screen-Display Controls English-19Adjust PictureEnglish-20 Audio ScheduleEnglish-21 PIP OSDEnglish-22 Multi Display English-23Display Protection English-24Advanced Option English-25English-26 Image Sticking of LCD Panel RecommendationsEnglish-27 Remote Control Function English-28English-29 Connection English-30Controlling the LCD monitor via LAN Control Connecting to a NetworkNetwork Setting by Using an Http Browser OverviewHandling of the Address for Operation via a Browser Network SettingsPreparation Before Use English-32Alert Mail Setting English-33English-34 OSD Display PROTECTION-FANCONTROL-COOLING FAN = Auto Features English-35Troubleshooting English-36Specifications X461S Product SpecificationsEnglish-37 Specifications X551S English-38Pin Assignment English-39Energy Saving Manufacturer’s Recycling and Energy InformationDisposing of your old NEC product Weee Mark European Directive 2002/96/EC

X461S, X551S specifications

The NEC X551S and X461S are high-performance professional large format displays designed to deliver exceptional picture quality and reliable performance for various commercial applications. Both models are perfect for environments such as retail spaces, conference rooms, airports, and digital signage.

The NEC X551S features a 55-inch screen with a resolution of 1920 x 1080 pixels, providing stunning full HD visuals. Similarly, the X461S boasts a 46-inch display with the same resolution, ensuring clarity and detail across both models. The high brightness levels of up to 700 cd/m² for the X551S and 450 cd/m² for the X461S enhance visibility in well-lit environments, making them ideal for outdoor installations or brightly lit areas.

One of the standout characteristics of the NEC displays is their advanced technology. The X551S and X461S utilize an LED backlight system, which not only improves energy efficiency but also enhances color rendition and overall picture quality. The displays feature a wide viewing angle, ensuring that images remain vibrant and clear from various perspectives. This is essential for delivering content to a larger audience without sacrificing quality.

In terms of connectivity, both models come equipped with multiple input options, including HDMI, DisplayPort, and DVI-D, allowing for flexible integration with various media sources. Additionally, the NEC X551S and X461S support NEC’s extensive range of optional accessories, including multi-display solutions, which enable users to create larger video walls for even more impactful presentations.

The displays are built to operate for extended periods, with a rated lifespan of up to 50,000 hours, making them a reliable choice for continuous use. Both models also include built-in cooling systems to maintain optimal operating temperatures, ensuring consistent performance even in demanding environments.

Moreover, the NEC X551S and X461S come with comprehensive warranty options and support services, further enhancing their appeal for business applications. Their sleek, professional design compliments any setting and provides a touch of sophistication.

In summary, the NEC X551S and X461S are excellent choices for users looking for high-quality, reliable, and versatile displays that meet the demands of commercial use, while offering advanced features and technologies to ensure outstanding performance.
Top Page Image Contents