NEC V651, V462 user manual Multi Display, English-24

INFORMATION OSD		Selects whether the information OSD is displayed or not. The information OSD will be displayed	ON, 3 Sec.
		when the input signal or source changes. The information OSD will also give a warning when
		there is no-signal or the signal is out-of range.
		An interval between 3 to 10 seconds for the Information OSD to appear is available.
MONITOR INFORMATION		Indicates the model and serial number of your monitor.	-
		CARBON SAVINGS: Display the estimated carbon saving information in kg. The carbon footprint
		factor in the carbon saving calculation is based on the OECD (2008 Edition).
OSD TRANSPARENCY		Set the transparency of the OSD.	ON
OSD ROTATION		Determines the OSD display direction between landscape and portrait.	LANDSCAPE
		V651 display direction is landscape only.
	LANDSCAPE	Display the OSD with landscape mode.
	PORTRAIT	Display the OSD with portrait mode.
INPUT NAME		You can create a name for the INPUT currently being used.	-
		Max: 8 characters, including Space, A-Z, 0-9, and some symbols.
CLOSED CAPTION		Activates closed captioning.	OFF
VIDEO1, VIDEO2, S-VIDEO inputs only
RESET		Resets the following settings within the OSD menu back to factory setting:	-
		MENU DISPLAY TIME, OSD POSITION, INFORMATION OSD, OSD TRANSPARENCY,
		CLOSED CAPTION.
MULTI DISPLAY
CONTROL ID		Sets the monitor ID number from 1-100 and group ID from A-J.	1
		NOTE: Group ID is made of multiple selections.
IR CONTROL		Selects the mode of the monitor for use with the infra-red remote control when using the	NORMAL
		RS-232C daisy chain.
	NORMAL	The monitor will be controlled normally using the remote controller.
	PRIMARY	Choose “PRIMARY” for the fi rst monitor within an RS-232C daisy chain.
	SECONDARY	Choose “SECONDARY” for all subsequent monitors within an RS-232C daisy chain.
	LOCK	Prevents the monitor from being controlled by the wireless remote controller. To return to normal
		operation, press the “DISPLAY” button on the remote controller for 5 seconds.
TILE MATRIX		Allows one image to be expanded and displayed over multiple screens (up to 100) through a
		distribution amplifi er.
		NOTE: Low resolution is not suitable for tiling to a large number of monitors. You can operate
		without a distribution amplifi er at a lower number of screens.
		The ZOOM setting of ASPECT becomes invalid.
	H MONITORS	Number of monitors arranged horizontally.	1
	V MONITORS	Number of monitors arranged vertically.	1
	POSITION	Select which section of the tiled image to be displayed on the monitor.	1
	TILE COMP	Turns the TILE COMP feature on.	NO
	ENABLE	Enables Tile Matrix.	NO
POWER ON DELAY		Adjusts the delay time between being in “standby” mode and entering “power on” mode.	0 Sec.
		“POWER ON DELAY” can be set between 0 and 50 seconds.
POWER INDICATOR		Turns ON or OFF the LED located at the front of the monitor.	ON
		If “OFF” is selected, LED will not light when the LCD monitor is in active mode.
EXTERNAL CONTROL
	CONTROL	Selects the control interface, RS-232C or LAN.	RS-232C
	LAN RESET	Resets the LAN settings.	-
	ID=ALL REPLY	When controlling the monitor externally, select if the communication command, which specifi es	OFF
		destination equipment ID (ALL or GROUP ID), is replying or not. When you need reply, please
		select “ON”.
		If you connect the multiple monitors that are daisy-chained from second monitor by RS-232C,
		you need to select “OFF” from second monitor.
	MAC ADDRESS	Displays the MAC ADDRESS.	-

English-24