3.Installing and removing optional table top stand
CAUTION: Installing and removing the stand must be done by two or more people for V462, by four or more people for V651.
To install, follow those instructions included with the stand or mounting apparatus. Use only those devices recommended by the manufacturer.
NOTE: Use ONLY thumbscrews which are included in the monitor. For V651, use ONLY the thumbscrews which are included with the optional table top stand.
When installing the stand, handle the unit with care to avoid pinching your fi ngers.
Optional table top stand
Table
Protective Sheet
NOTE: For V462, install the stand so the long end of the feet face forward.
For V651, install the stand in the direction of the arrow which, is on the optional stand.
Use the
4. Ventilation Requirements
When mounting in an enclosed space or recessed area, leave adequate room between the monitor and the enclosure to allow heat to disperse, as shown below.
Allow adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate away from the unit and mounting apparatus; especially when you use monitors in multiple screen.
NOTE: The sound quality of the internal speakers will differ according to the acoustics of the room.
5. Prevent Tipping
When using the monitor with the optional table top stand fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided clamps and screws. For the V651, the clamps and screws are included with the optional table top stand.
204 mm (V462)
400 mm (V651)
Screw Holes
Clamp | Cord or chain |
| |
| Screw |
Before attaching the LCD monitor to the wall, make sure that the wall can support the weight of the monitor.
Be sure to remove the cord or chain from the wall before moving the LCD.
English