NEC Comprehensive Guide to XM29 Monitor DIP Switch Features
Page 14

Functions of DIP SW

SHORT

ON

1 2 3 4 5 6 7 8

OPEN

Functions and Settings of DIP SW

This DIP switch is used for Sync. Control, Intelligent Power Manager, External control, wireless control, and OSM control. To change a switch setting use a pointed object, such as a pen or pencil, to push the switch to the desired position.

Set all the pins except No. 2 and 7 to the OFF/OPEN position during normal operation.

The pins nos 3 and 5 are not used.

Pin No 1 and 2(Sync. Control )

The No. 1 and 2 pins set Sync. Control.

Set the No. 1 pin to the OFF/OPEN position and the No. 2 pin to the ON/ SHORT position during normal operation. The monitor automatically determines if the input signal is separate sync, composite sync or sync on green signal in this order.

Pin No. 4 (Intelligent Power Manager)

This function saves power.

When Intelligent Power Manager control is on, by using the monitor’ s horizontal and vertical SYNC signals, the monitor can be prompted into the different IPM modes. The following is the description of the LED indicator for the IPM power saving modes:

Mode

LED Indicator

Power Saving

On

Green

None

 

 

 

Standby

Red (Steady)

None

 

 

 

Standby

Amber(Blinking quickly)

Minimum

 

 

(Quickest recovery)

 

 

 

Suspend

Amber(Blinking moderately)

Moderate

 

 

(EPA<30 watts, Moderate recovery)

 

 

 

Off

Amber(Blinking slowly)

Maximum

 

 

(EPA<30 watts, Slowest recovery)

 

 

 

Power Off

No Light

No Power Used (Fully Off)

 

 

 

 

 

 

NOTE: The Intelligent Power Manager works only for the RGB input. If selecting the VIDEO input, or when connecting to no signal source, the Intelligent Power Manager does not work.

17

Set the No. 1 pin to the ON/SHORT position when sync on green signals are necessary for synchronization with an external component.

When a composite signal is present, the picture may be distorted. If this happens, set the No.2 pin to the OFF/OPEN position.

Pin No. 6 (EXT. CONTROL)

When this switch is set to ON, the External Control function is activated. See page 43 for pin assignments. If you have some monitors you do not want to control by remote, set to OFF.

Pin No. 7 (REMOTE ON/OFF)

When this switch is set to ON/SHORT, the monitor can be controlled by the wireless remote control unit.

Pin No. 8 (OSM System Control Menu ON/OFF)

When this switch is set to ON/SHORT, the system control menu is displayed. In this menu the following features are enabled:

Power on mode set(POWER ON MODE)

Front control key on/off(FRONT CONTROL)

Language selection(LANGUAGE)

Video mode(auto/manual) selection(VIDEO MODE)

OSM on/off(OSM ON/OFF)

PC-control on/off(PC-CONTROL)

For the setting procedures to set the items, see page 39.

18

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Plus Plus 29 Plus DOC compliance Notice Risk of Electric Shock Do not OpenDOC avis de conformation AvertissementNEC Multimedia Monitor Products Contents Introduction Features you’ll enjoy includeContents of the Package Introduction to the MultiSync XP29 Plus/XM29 Plus MonitorTerminal Board Part Names and FunctionsFront View Rear ViewSpeakers Speaker Select INT/EXT Select SwitchTerminal Board AC InputRGB 1 MultiCable RGB AudioRemote IN/OUT DIP SwitchRGB PC/EXT CTL IND-Sub 15-pinDegauss Remote Control UnitPower ON/OFF POSITION/CONTROLScan Select Raster ControlVisual Control NormalOperating Range Battery Installation and ReplacementRemote Control Cautions Functions and Settings of DIP SW Functions of DIP SWIBM XGA/SuperVGA/VGA or CompatiblesMacintosh or InstallationWiring Diagram XP29 Plus/XM29 PlusConnecting Your Document Camera Connecting Your PC or Macintosh ComputerConnecting Your VCR or Laser Disc Player Connecting Your NEC IDC Series Scan ConverterDaisy-chaining Your monitors Sub 15 Pin RGB Signal CompositionSUB 15pin RGB Input Connector Analog only External Speaker Connections General Controls PowerUsing OSM Controls DegaussingDirect Control Screen Contrast Accessing OSMVisual Controls Group ColorKeystone/Tilt/Rotation/Scan Select Controls Group Position/H-width/Pin-cushion Controls GroupPosition/V-height/V-linearity Controls Group TiltSource Information RGB Controls GroupOSM Location/OSM Turn Off Time Control OSM H-POSIAll Visual Settings Volume ControlReset Control All Raster SettingsOSM System Control Menu OSM ON/OFF PC-CONTROLExternal Control PC/External Control Port Pin AssignmentsSUB 15pin Input/Output Command sending/receiving sequence Command referenceCommand Communication Sequence XP29 Plus/XM29 Plus → PC Contents LengthCOM1 COM2 COM1Troubleshooting Specifications Through OUTPage Dimensions Composite Sync Timing ChartsSeparate Sync Sync. Polarity Positive / NegativeVertical Composite Sync. & Video Sync. on GreenTypical Input Signal Timing Vertical Frequency Hor Ver Signal Identification for Raster PresetPolarity State Frequency Service and Support Policies Eligibility/Return for Exchange Procedure

XP29 Plus, XM29 Plus, XP29, XM29 Plus specifications

The NEC XP29 and XM29 Plus are advanced display solutions designed to enhance visual experiences across various applications. These models exemplify cutting-edge technology with an emphasis on picture quality, versatility, and user convenience.

The NEC XP29 boasts a high-resolution panel with exceptional color accuracy, making it ideal for professional environments such as graphic design, video editing, and photography. With a wide color gamut, it ensures that hues are rendered precisely, which is critical for professionals who rely on true-to-life color representation. The XP29 also supports multiple connectivity options, including HDMI, DisplayPort, and USB-C, allowing seamless integration with various devices, from computers to video consoles.

Meanwhile, the NEC XM29 Plus is targeted towards demanding corporate and digital signage applications. It features a robust design that ensures reliable performance in high-traffic environments. With its superior brightness levels and anti-reflective technology, the XM29 Plus delivers clear, vivid images even in well-lit spaces. The model also incorporates advanced scaling technology, enabling users to display multiple input sources without compromising image quality.

The XP29 Plus enhances the capabilities of the XP29 by incorporating advanced ergonomic features such as height adjustment, swivel, and tilt functionalities. This design ensures that users can customize their viewing experience for maximum comfort, reducing fatigue during long working hours. Additionally, the XP29 Plus integrates smart energy-saving technologies, minimizing power consumption while retaining optimal performance.

The XM29 Plus holds the advantage of built-in speakers, making it an all-in-one solution for presentations and multimedia displays. This feature is particularly beneficial in educational and corporate settings where audio-visual elements play a pivotal role in engaging audiences. The model's remote management capabilities facilitate seamless control across multiple screens, ideal for dynamic content presentations.

Overall, the NEC XP29 and XM29 Plus series stand out for their combination of high-performance technology and user-centric features. They not only meet the demands of professionals and businesses but also provide versatility that is essential for a variety of applications, ensuring a superior visual experience.
Top Page Image Contents