NEC XP29 Plus, XM29 Plus Daisy-chaining Your monitors, Sub 15 Pin RGB Signal Composition

Page 17

Daisy-chaining Your monitors

The REMOTE IN/OUT terminals allow you to control monitors by one remote control.

NOTE: The connection of three XP29 Plus/XM29 Plus monitors or more with THROUGH OUT (VIDEO 1 or 2) terminals may degrade image quality.

To do so:

When using the VIDEO inputs:

THROUGH OUT (VIDEO 1) Connections

1.Connect THROUGH OUT 1 BNC or S-VIDEO 1 OUT to external compo- nents to relay the signal input at VIDEO 1 IN(BNC-type), or S-VIDEO 1 IN.

2.Connect the external component mono audio or stereo left channel audio input to L AUDIO.

3.Connect the external component stereo right channel audio input to R AU- DIO.

4.Set the 75Ω/HIGH impedance select switch of the corresponding input sig-

nal (BNC, S-VIDEO) on all but the last monitor to “HIGH” position. On only the last monitor is set to “75Ω” position.

THROUGH OUT (VIDEO 2) Connections

1.Connect THROUGH OUT 2 BNC or S-VIDEO 2 OUT to external component to relay the signal input at VIDEO 2 IN(BNC-type) or S-VIDEO 2 IN.

2.Connect the external component mono audio or stereo left channel audio input to L AUDIO.

23

3.Connect the external component stereo right channel audio input to R AU- DIO.

4.Set the 75Ω/HIGH impedance select switch of the corresponding input signal

(BNC, S-VIDEO) on all but the last monitor to “HIGH” position. On only the last monitor is set to the “75Ω” position.

5.Connect the REMOTE OUT of the monitor to the REMOTE IN of the next monitor using the optional remote cable.

When using the RGB inputs:

THROUGH OUT Connections

1.(RGB1): Connect D-Sub 15-pin THROUGH OUT to an RGB input connector of other monitors.

(RGB2): Connect the R.G.B.H and V THROUGH OUT terminals to relay the signal input at the R.G.B.H and V IN terminals.

2.Set all the 75Ω/HIGH impedance select switches on all but the last monitor to “HIGH” position. On only the last monitor is set to the “75Ω” position.

3.Connect the REMOTE IN of the monitor to the REMOTE OUT of the next monitor using the optional remote cable.

NOTE: ''Plug and Play'' is available only for the monitor connected directly to a personal computer with the D-Sub 15-pin RGB connector. Therefore, ''Plug and Play'' does not work for monitors connected with the THROUGH OUT terminal. This is because only the RGB video, the horizontal, and the vertical sync. signal is output from the THROUGH OUT terminals.

NOTE: ''Plug and Play'' is not available for the RGB 2 BNC terminals.

D-Sub 15 Pin RGB Signal Composition

Pin Assignments and Signal Levels for 15 pin RGB (Analog)

8 7 6 5 4 3 2 1

15 14 13 12 11 10 9

D-SUB 15pin RGB Input Connector (ANALOG ONLY)

Pin No.

Signal to be connected (D-SUB 15 pin)

1RED

2GREEN or Sync Green

3BLUE

12No Connection

13H. or Composite sync

14V.SYNC

15No Connection

4GND

5GND

6GND

7GND

8GND

11

GND

10No Connection

9 No Connection

5 4 3 2 1

10 9 8 7 6

15 14 13 12 11

Pin No.

Through output (MAC 15 pin)

2RED

5GREEN or Sync Green

9BLUE

7SDA (PnP)

3H. or Composite sync

12V.SYNC

15SCL (PnP)

1

GND

4

GND

6

GND

11

GND

13

GND

8No Connection

10 No Connection

14 No Connection

24

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Plus Plus 29 Plus Risk of Electric Shock Do not Open DOC compliance NoticeAvertissement DOC avis de conformationNEC Multimedia Monitor Products Contents Contents of the Package Features you’ll enjoy includeIntroduction Introduction to the MultiSync XP29 Plus/XM29 Plus MonitorFront View Part Names and FunctionsTerminal Board Rear ViewTerminal Board Speaker Select INT/EXT Select SwitchSpeakers AC InputRGB Audio RGB 1 MultiCableRGB DIP SwitchRemote IN/OUT PC/EXT CTL IND-Sub 15-pinPower ON/OFF Remote Control UnitDegauss POSITION/CONTROLVisual Control Raster ControlScan Select NormalOperating Range Battery Installation and ReplacementRemote Control Cautions Functions of DIP SW Functions and Settings of DIP SWWiring Diagram InstallationIBM XGA/SuperVGA/VGA or CompatiblesMacintosh or XP29 Plus/XM29 PlusConnecting Your VCR or Laser Disc Player Connecting Your PC or Macintosh ComputerConnecting Your Document Camera Connecting Your NEC IDC Series Scan ConverterDaisy-chaining Your monitors Sub 15 Pin RGB Signal CompositionSUB 15pin RGB Input Connector Analog only External Speaker Connections Using OSM Controls PowerGeneral Controls DegaussingDirect Control Screen Visual Controls Group Accessing OSMContrast ColorPosition/V-height/V-linearity Controls Group Position/H-width/Pin-cushion Controls GroupKeystone/Tilt/Rotation/Scan Select Controls Group TiltOSM Location/OSM Turn Off Time Control RGB Controls GroupSource Information OSM H-POSIReset Control Volume ControlAll Visual Settings All Raster SettingsOSM System Control Menu PC-CONTROL OSM ON/OFFExternal Control PC/External Control Port Pin AssignmentsSUB 15pin Input/Output Command sending/receiving sequence Command referenceCommand Communication Sequence COM1 COM2 Contents LengthXP29 Plus/XM29 Plus → PC COM1Troubleshooting Through OUT SpecificationsPage Dimensions Separate Sync Timing ChartsComposite Sync Sync. Polarity Positive / NegativeComposite Sync. & Video Sync. on Green VerticalTypical Input Signal Timing Vertical Frequency Hor Ver Signal Identification for Raster PresetPolarity State Frequency Eligibility/Return for Exchange Procedure Service and Support Policies

XP29 Plus, XM29 Plus, XP29, XM29 Plus specifications

The NEC XP29 and XM29 Plus are advanced display solutions designed to enhance visual experiences across various applications. These models exemplify cutting-edge technology with an emphasis on picture quality, versatility, and user convenience.

The NEC XP29 boasts a high-resolution panel with exceptional color accuracy, making it ideal for professional environments such as graphic design, video editing, and photography. With a wide color gamut, it ensures that hues are rendered precisely, which is critical for professionals who rely on true-to-life color representation. The XP29 also supports multiple connectivity options, including HDMI, DisplayPort, and USB-C, allowing seamless integration with various devices, from computers to video consoles.

Meanwhile, the NEC XM29 Plus is targeted towards demanding corporate and digital signage applications. It features a robust design that ensures reliable performance in high-traffic environments. With its superior brightness levels and anti-reflective technology, the XM29 Plus delivers clear, vivid images even in well-lit spaces. The model also incorporates advanced scaling technology, enabling users to display multiple input sources without compromising image quality.

The XP29 Plus enhances the capabilities of the XP29 by incorporating advanced ergonomic features such as height adjustment, swivel, and tilt functionalities. This design ensures that users can customize their viewing experience for maximum comfort, reducing fatigue during long working hours. Additionally, the XP29 Plus integrates smart energy-saving technologies, minimizing power consumption while retaining optimal performance.

The XM29 Plus holds the advantage of built-in speakers, making it an all-in-one solution for presentations and multimedia displays. This feature is particularly beneficial in educational and corporate settings where audio-visual elements play a pivotal role in engaging audiences. The model's remote management capabilities facilitate seamless control across multiple screens, ideal for dynamic content presentations.

Overall, the NEC XP29 and XM29 Plus series stand out for their combination of high-performance technology and user-centric features. They not only meet the demands of professionals and businesses but also provide versatility that is essential for a variety of applications, ensuring a superior visual experience.
Top Page Image Contents