Alert Mail Setting, English-33 | NEC MULTISYNC X462HB manual

Alert Mail Setting

http://<the Monitor’s IP address>/lanconfig.html

This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when an error occurs in the monitor.

Alert Mail	Checking [ENABLE] will turn on the Alert Mail feature.
	Checking [DISABLE] will turn off the Alert Mail feature.

Host Name	Type in the hostname of the network connected to the monitor.
	Up to 60 alphanumeric characters can be used.

Domain Name	Type in the domain name of the network connected to the monitor.
	Up to 60 alphanumeric characters can be used.

Sender’s Address	Type in the senders address. Up to 60 alphanumeric and symbols characters can be used.

SMTP Server	Type in the SMTP server name to be connected to the monitor.
	Up to 60 alphanumeric characters can be used.

Recipient’s Address	Type in your recipient’s address. Up to 60 alphanumeric and symbols characters can be used.
1 to 3

Authentication Method	This selects the authentication method of the e-mail transmission.

POP3 Server	This specifies the address of the POP3 server that is used in the authentication of the e-mail.

User Name	This sets the user name for logging into the authentication server when authentication is required
	for the e-mail transmission. Up to 60 alphanumeric characters can be used.

Password	This sets the password for logging into the authentication server when authentication is required
	for the e-mail transmission. Up to 60 alphanumeric characters can be used.

TestMail	Click this button to send a test mail to check if your settings are correct.

Apply	Click this button to reflect the above settings.
	NOTE: Make sure to execute “the reboot” from the “reboot screen” or to turn the monitor off and
	then back on to enable the changing, after clicking [Apply].

NOTE: • If you execute a test, you may not receive an Alert mail.

Should this happen, check if the network settings are correct.

•If you entered an incorrect address in a test, you may not receive an Alert mail. Should this happen, check if the Recipient’s Address is correct.

TIP: The Alert Mail settings will not be affected even when [RESET] is done from the menu. For Control command diagram, please see file “External_Control.pdf” on the CD-ROM.

English-33

English