NEC MULTISYNC X462HB user manual English-25

ADVANCED OPTION

INPUT DETECT			Selects the method of input detection the monitor uses when more than two input devices	FIRST DETECT
All inputs except for TV*			are connected.
	NONE		The Monitor will not search the other video input ports.
	FIRST DETECT		When the current video input signal is not present, then the monitor searches for a video signal
			from the other video input port. If the video signal is present in the other port, then the monitor
			switches the video source input port to the new found video source automatically.
			The monitor will not look for other video signals while the current video source is present.
	LAST DETECT		When the monitor is displaying a signal from the current source and a new secondary source
			is supplied to the monitor, the monitor will automatically switch to the new video source.
			When current video input signal is not present, the monitor searches for a video signal from
			the other video input port. If the video signal is present in the other port, then the monitor
			switches the video source input port to the new found video source automatically.
	VIDEO DETECT		DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2 or S-VIDEO inputs will have priority over
			DVI, VGA, RGB/HV. When DVD/HD1, DVD/HD2, SCART, VIDEO1, VIDEO2 or S-VIDEO
			input signal is present the monitor will change and keep to the DVD/HD1, DVD/HD2, SCART,
			VIDEO1, VIDEO2 or S-VIDEO input.
	CUSTOM DETECT		Set the priority of input signals.
			When CUSTOM DETECT is selected, monitor searches listed inputs only.
INPUT CHANGE			Sets input change speed.	NORMAL
			NOTE: When “QUICK” is selected, picture may be distorted when signal input is changed.
			This function should be chosen after all adjustment options have been made for the input.
LONG CABLE COMP			Manually compensates for image degradation caused from using a long cable.
	EQUALIZE			OFF
	VGA, RGB/HV inputs only
		POLE	Adjusts frequency.	0
		PEAK	Adjusts equalizing value.	0
		GAIN	Adjusts gain value.	0
		OFFSET	Adjusts slice level of synchronized signal.	0
	SYNC TERMINATE		Selects the terminate resistance for matching the cable impedance.	HIGH
	RGB/HV inputs only
TERMINAL SETTING
	DVI MODE		Selects the kind of DVI-D equipment which is connected to the DVI input. Select “DVI-PC”	DVI-PC
			when PC or other computer equipment is connected. Select “DVI-HD” when DVD player,
			which has DVI-D output, is connected.
	BNC MODE		Selects the kind of equipment which is connected to the BNC input.	RGB
			RGB: Analog input
			COMPONENT: Component
			VIDEO:
	SCART MODE		Input mode for devices using SCART connectors.	OFF
	HDMI SIGNAL		RAW: Disable the expanded feature.	EXPAND
			EXPAND: Expand image contrast and increase detail in the dark and bright areas.
SCAN CONVERSION			Selects the IP (Interlace to Progressive) conversion function.	PROGRESSIVE
All inputs except VGA, RGB/HV			Note: For DVI input “DVI-HD” needs to be enabled in the DVI mode menu.
	PROGRESSIVE		Converts interlaced signals to progressive. This is the default setting.
	INTERLACE		Disables IP conversion. This setting is best suited for motion pictures, but increases the risk
			of image retention.

*: The product you purchased may not have this feature.

English

English-25