NEC MULTISYNC X462HB user manual English-24

LAN SETTING		When you use this function, EXTERNAL CONTROL should be “LAN”.
		NOTE: When changing the LAN SETTING, you need to wait several seconds until the LAN
		SETTING is applied.
	DHCP	Enabling this option automatically assigns an IP address to the monitor from your DHCP server.	DISABLE
		Disabling this option allows you to register the IP address or subnet mask number obtained
		from your network administrator.
		NOTE: Consult your network administrator for the IP address when “ENABLE” is selected for [DHCP].
	IP ADDRESS	Set your IP address of the network connected to the monitor when “DISABLE” is selected for [DHCP].	192.168.0.10
	SUBNET MASK	Set your subnet mask number of the network connected to the monitor when “DISABLE” is	255.255.255.0
		selected for [DHCP].
	DEFAULT GATEWAY	Set your default gateway of the network connected to the monitor when “DISABLE” is selected	192.168.0.1
		for [DHCP].
	DNS PRIMARY	Set your primary DNS settings of the network connected to the monitor.	0.0.0.0
	DNS SECONDARY	Set your secondary DNS settings of the network connected to the monitor.	0.0.0.0
SETTING COPY		In a daisy chain scenario, select the OSD menu categories that you want to copy over to the	NO
		other monitor. NOTE: When you use this function, EXTERNAL CONTROL should be “RS-232C”.
		This function resets to default when power is off. This function has a limit depending on the
		cable you use.
	COPY START	Select “YES” and press the SET button to start copying.
	ALL INPUT	All input terminals settings are copied when you select this item. Default is off.
MULTI DISPLAY RESET		Resets “MULTI DISPLAY” options back to factory settings.	-
DISPLAY PROTECTION
POWER SAVE		Sets how long the monitor waits to go into power save mode after the signal is lost.	ON
All inputs except for TV*		Note: When connecting DVI, the video card might not stop sending the digital data even though
		the image might have disappeared. If this occurs the monitor will not switch into power
		management mode (standby mode).
STANDBY MODE		Lowers power consumption.	ECO
		Note: When in ECO STANDBY mode, DDC/CI does not function.	STANDBY
HEAT STATUS		Displays status of the FAN, BRIGHTNESS and TEMPERATURE.	-
FAN CONTROL		Cooling fans are running always for X462HB.	-
SCREEN SAVER		Use the SCREEN SAVER function to reduce the risk of Image Persistence.
	GAMMA	The display gamma is changed and fixed when “ON” is selected.	OFF
	BRIGHTNESS	The brightness is decreased when “ON” is selected.	OFF
		NOTE: Do not select this function when picture model is AMBIENT1 or AMBIENT2.
	MOTION	The screen image is slightly expanded and moves in 4 directions (UP, DOWN, RIGHT, LEFT)	OFF
		at user determined intervals. You can set interval time and zooming ratio.
		This function is disabled when PIP, STILL, TEXT TICKER or TILE MATRIX are enabled.
SIDE BORDER COLOR		Adjusts the color of the side borders when a 4:3 image is displayed.	15
		Press + button, the bar will become lighter.
		Press - button, the bar will become darker.
AUTO BRIGHTNESS		Adjusts the brightness level according to the input signal.	OFF
DPORT, DVI, VGA, RGB/HV inputs only		NOTE: Do not select this function when picture model is AMBIENT1 or AMBIENT2.
CHANGE SECURITY		Allows the security password to be changed.	-
PASSWORD		The factory preset password is 0000.
SECURITY LOCK		Locks the security password.	OFF
DDC/CI		ENABLE/DISABLE: Turns ON or OFF the two way communication and control of the monitor.	ENABLE
DISPLAY PROTECTION		Resets the following settings within the DISPLAY PROTECTION menu back to factory setting:	-
RESET		POWER SAVE, STANDBY MODE, SCREEN SAVER, SIDE BORDER COLOR,
		AUTO BRIGHTNESS, DDC/CI.

*: The product you purchased may not have this feature.

English-24