NEC LCD1510+ user manual Tilt and Swivel, Remove Monitor Stand for Mounting

Quick Start cont.

Tilt and Swivel

Grasp both sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).

Remove Monitor Stand for

Mounting

To prepare the monitor for alternate mounting purposes:

1. Disconnect all cables. Figure TS.1

2.Place one hand under bottom of

screen (Figure RL.1), lift up and simultaneously push the button on the bottom back of the stand raise it to the maximum height (Figure RL.2).

3.Place monitor face down on a non-abrasive surface. (Place the screen on a 2-inch platform so that the stand is parallel with the surface.) (Figure S.1)

2 inches

Figure S.1

4.Remove cable cover. Remove the 4 screws connecting the monitor to the stand and lift off the stand assembly (Figure S.2). The monitor is now ready for mounting in an alternate manner.

5.Reverse this process to reattach stand.

NOTE: Use only VESA-compatible alternative mounting method.

4

3

2

1

Figure S.2

7

78134702.wpc 9 8/20/99, 10:46 AM