![](/images/new-backgrounds/1158297/15829741x1.webp)
Troubleshooting/Support | E - 21 |
Problem | Cheak These Items |
|
Image is unstable, | - Signal cable should be completely attached to the | |
unfocused or | computer. |
|
swimming is | - Use the OSM Image Adjust controls to focus and | |
apparent | adjust display by increasing or decreasing the Fine Control. | |
| When the display mode is changed, the OSM Image | |
| Adjust settings may need to be |
|
| - Check the monitor and your display card with respect | |
| to compatibility and recommended signal timings. | |
| - If your text is garbled, change the video mode to | |
|
| |
LED on monitor is | - Power Switch should be in the ON position and power | |
not lit (no green or | cord should be connected. |
|
amber colour can be | - Make certain the computer is not in a | |
seen) | mode (touch the keyboard or mouse). |
|
|
|
|
Display image has a | Select “TYPE” in the OSM Information menu | and |
green cast to it | press the or Control button. |
|
|
| |
Display image is not | - Use the OSM Image Adjust controls to increase or | |
sized properly | decrease the H. Size. |
|
-Check to make sure that a supported mode and signal timing has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode or refresh rate.)
English Deutsch Fran•ais
78134811.PM5 | 31 | 99.12.24, 2:19 PM |