NEC 790 manual Installing ActiveSync

Page 26

!Configure the host PC's IP address on the MobilePro as follows:

1.Tap Start, Settings, Control Panel, and double tap the network icon.

2.Highlight NE2000 Compatible Ethernet Driver and select the Properties button.

3.In the IP address tab, select (place a dot beside) “Obtain an IP address via DHCP.”

4.Select the Name Servers tab and enter the host PC's IP address in the “Primary WINS” field.

To identify the host PC's IP address, run an IP config utility. In Windows 95, 98, and 2000, run Win IP Config. In Windows NT, run IP Config. If you need assistance, see your network administrator.

Installing ActiveSync

Follow these steps to install Microsoft ActiveSync for synchronization with Microsoft Outlook. The installation sequence may vary depending upon the Microsoft components installed on your host PC.

Note If your host PC uses the Windows NT operating system, you must install Windows NT Networking before installing Microsoft ActiveSync to your host PC.

1.Insert the Microsoft ActiveSync CD in the CD-ROM reader of your host PC.

!If auto insert is enabled on your host PC, the setup window appears.

!If auto insert is not enabled, go to Start, Run, browse for the CD-ROM drive, and run the setup.exe file.

2.Click Next to start the Setup wizard. The Selection Installation folder appears.

3.Click Next to accept the default installation folder or modify the folder destination and click Next.

Getting Started 1-19

Image 26

Contents B I L E P R O 7 9 Proprietary Notice and Liability Disclaimer Contents Iv Contents Troubleshooting Specifications Index Using This Guide Using This GuideViii Using This Guide Text ConventionsGetting Started Welcome Getting StartedUnpacking Your MobilePro Getting to Know Your MobilePro NEC MobileProLithium-Ion battery pack Installing and Charging the BatteryAccessories Inserting the battery pack Getting Started Connecting the AC Adapter Connecting the AC adapter Taking a Quick Tour Introducing the SoftwareConnecting to Your PC via Serial Verifying PC Connection SettingsConnecting the PC Connect Cable Ensuring the Availability of the Serial PortConnecting the PC connect cable Installing Microsoft ActiveSync Network RequirementsVerifying Synchronization Settings Creating a PartnershipConnecting to Your PC via Infrared Enabling the Infrared Port Modifying PC Connection SettingsSetting the Infrared Connection Speed Installing Microsoft ActiveSync Installing ActiveSync Creating a Partnership Synchronizing via the Infrared Port Synchronizing with Your Host PCSynchronizing via the Serial Port Resynchronizing Your MobileProUsing other Communication Devices Connecting RemotelyGetting Help Help ResourcesPocket PC Magazine Buyer’s Guide Introducing NEC MobilePro Display panel Identifying System FeaturesAround the Front of the System Keyboard panel and base unit Introducing the NEC MobileProAround the Back of the System Status LEDsAround the Left Side of the System Features on the back of the systemLeft side features 6Introducing the NEC MobilePro Around the Bottom of the System Right side featuresAround the Right Side of the System Features on the bottom of the system Opening the Display Panel Using the StylusUsing MobilePros Power Sources Determining Battery Status Recharging the Main Battery PackRecharging the Backup Battery MobilePro Power ManagementBattery Replacement Removing and Inserting the Battery PackRemoving the battery pack Battery Precautions Caring for the MobileProPrecautions Routine Cleaning Storage RequirementsIntroducing the NEC MobilePro Introducing Windows CE Introducing Windows CE Using Windows CEWindows CE Operating System Dragging and Dropping Windows CE DesktopPocket Applications Printing Features Network Capabilities Creating a Network Ethernet ConnectionMicrosoft ActiveSync Online Help Backing Up and Restoring DataUsing the NEC MobilePro Using the NEC MobilePro Powering On and OffPowering on and off Making Display Panel Adjustments Adjusting the brightnessEnabling the Suspend Switch BacklightUsing the Keyboard Keyboard Using Application Shortcut Keys Default Application Shortcut KeysDefining Application Shortcut Keys Other Function KeysAdjusting MobilePro Settings Using the Scroll Dial Locating the Scroll DialMenu Selections Using the Voice RecorderRecording Memos Using PC Cards Inserting PC CardsInserting a PC card Verify that the PC card is securely in the slotInserting CompactFlash Cards Using CompactFlash CardsRemoving PC Cards Removing CompactFlash Cards Inserting a CompactFlash cardUsing the IR Port Resetting the MobilePro Using the Soft Reset ButtonUsing the Full Reset Button Soft reset buttonBattery release latch Battery pack Battery release lock Using the FlashROM Configuration Utility Full reset buttonUsing the NEC MobilePro Setting Up a Remote Connection Setting Up a Remote Connection Preparing for Connection SetupConnecting the Internal Modem Connecting to an Internet Service Provider Connecting the telephone cableConnecting to a Remote Access Server Sending and Receiving Email Activating a Connection Tap Services again, if necessary and tap Connect Troubleshooting Troubleshooting2Troubleshooting Troubleshooting A-3 Specifications CPUSpecifications PortsSpecifications B-3 Recharge TimeDimensions Specifications B-5 Regulatory Statements Regulatory Statements for U.S. and CanadaFCC Statement for United States Only FCC Part Regulatory Statements IC CS-03 FCC Warning Battery Disposal Regulatory Statements for Europe CTR21Battery Disposal Declaration of Conformity Index Index-1Index-2 Index-3