NEC 750C manual Modulation Values

AT Commands (cont’d)

Command	Description	Default
\N1	Select normal mode connection
\N2	Select LAPM and MNP connection
\N3	Select LAPM, MNP and normal mode	X
	connection
\N4	Select only LAPM connection
\N5	Select only MNP connection
\V0	Disable extended result code
\V1	Enable extended result code
%C0	Disable data compression
%C1	Enable MNP 5 data compression
	negotiation
%C2	Enable V.42 bis data compression
%C3	Enable both V.42 bis and MNP5 data	X
	compression
+MS	Select modulation (see the next table for
	values)
	The command format is:
	+MS=<mod>,<automode>,<min_rate>,<m
	ax_rate>

			Modulation Values
<mod>	Modulation			Possible Rate
0	V.21			300
1	V.22			1200
2	V.22 bis			2400, 1200
9	V.32			9600, 4800
10	V.32 bis			14400, 12000, 9600, 7200, 4800
11	V.34			336000,31200, 28800, 26400, 24000,
				21400, 19200, 16800, 14400, 12000,
				9600, 7200, 4800, 2400
<automode>
0		Disables automatic modulation negotiation
1		Enables automatic modulation negotiation using V.8
		bis/V.8 or V.32 bis Annex A.

Modem Commands A-4