Loading paper
Follow these guidelines when loading plain and specialty paper in the paper support.
You can load up to: | Make sure: |
100 sheets of plain | The paper is designed for use with inkjet printers. |
paper |
|
10 envelopes | • The envelopes are loaded |
| vertically against the right |
| side of the paper support. |
| • The stamp location is in the |
| upper left corner. |
| • The envelopes are |
| designed for use with inkjet |
| printers. |
| • You squeeze and slide the |
| paper guide to the left edge |
| of the envelope (as shown). |
25 sheets of labels | The labels are designed for use with inkjet printers. |
10 sheets of card stock | • The card stock is designed for use with inkjet |
| printers. |
| • The thickness does not exceed .025 inches. |
10 greeting cards, | The cards are loaded vertically against the right side of |
index cards, postcards, | the paper support. |
or photo cards |
|
25 sheets of coated, | The glossy or coated side faces you. |
photo, or glossy paper |
|
10 transparencies | • The rough side faces you. |
| • The transparencies are designed for use with inkjet |
| printers. |
100 sheets of custom | • Your paper size fits within these dimensions: |
size paper | Width |
| |
| 76 to 216 mm |
| 3.0 to 8.5 in. |
| Length |
| 127 to 432 mm |
| 5.0 to 17.0 in. |
| 17 |