Lexmark 74, 75 manual Scanning was not successful, Edge of the copy did not print

Page 28

Scanning was not successful

You software may not have been installed properly. Try the following:

1If you are using Windows 98, Windows Me, or Windows 2000 click Start Settings Control Panel. If you are using Windows XP, click Start Control Panel Performance and Maintenance.

2Double-click the System icon.

3If you are using Windows 98 or Windows Me, click the Device Manager tab. If you are using Windows 2000 or Windows XP, click the Hardware tab, and then click the Device Manager button.

4Look for the Other Devices category. If there are any Lexmark devices found here, highlight them and press the Delete key.

Note: The Other Devices category appears only when unknown devices are present. You should not delete any Lexmark items unless they are present under the Other Devices category.

5Insert the CD and install the software again. Do not restart your computer.

Edge of the copy did not print

If your copy was made using the Color Copy button on the Operator panel, try using the Lexmark All-In-One Center and adjusting the Original size setting:

1Open the Lexmark All-In-One Center (see page 6).

2From the Copy... section, make sure Auto-Detectis listed as the Original size setting.

24

Image 28

Contents X74-X75 All-In-One User’s Guide Contents Thank you for purchasing a Lexmark X74-X75 All-In-One Learning about your All-In-One Setting up your All-In-OneUnderstanding the parts of your All-In-One Using the Operator Panel Status lightUsing Print Properties Understanding your softwareI want to... menu TabsPrint Properties tabs Save Settings menuOptions menu Using the Lexmark All-In-One Center All-In-One Main ScanCopy Creative TasksView Saved Images Maintain/TroubleshootOpen with Print a CopyUsing the Lexmark Solution Center TroubleshootingPrinter Status Main dialog boxContact MaintenanceInformation Advanced Using your All-In-One PrintingQuality/Speed Settings Paper type Scanning Copying Copy settings Faxing Troubleshooting Troubleshooting checklistPower light did not come on Setup troubleshootingAlignment page did not print Software installation appears incomplete All-In-One is not communicating with the computer Printing troubleshootingAll-In-One prints slowly Print is too dark or smudged All-In-One has a paper jamVertical lines are jagged or edges are not smooth Scanning, copying, and faxing troubleshooting White lines appear in graphics or solid black areasScanning was not successful Edge of the copy did not printCopy button on the operator panel did not work Uninstalling and reinstalling the softwareFax function did not work Appendix Industry Canada compliance statementAvis de conformité aux normes d’Industrie Canada European Community EC directives conformityJapanese Vcci notice United Kingdom Telecommunications Act Energy StarIndex Printing Status window changing appearance