Lexmark 1200 Series manual Creating fun projects, Replacing print cartridges, Part number

Creating fun projects

To create these and other fun projects:

1Open the Lexmark Solution Center (see page 8).

2Click How To.

3Select a project.

4Follow the instructions on the computer screen.

Replacing print cartridges

The Lexmark 1200 Series uses the following cartridges:

Item:	Part number:
Black cartridge	10N0016	16	17
Color cartridge	10N0026	26	27

Note: For information about ordering supplies, see the Maintenance tab on page 8.

1Make sure the All-In-One is on.

2Lift the scanner unit until the scanner support keeps it open.

The print cartridge carrier moves and stops at the loading position unless the All-In-One is busy.

3Grasp the tabs on the cartridge lids, and then lift the lids.

4Remove the old cartridges. Store them in an air-tight container or dispose of them.

5If you are installing new cartridges, remove the stickers and transparent tape from the bottom of the cartridges.

Warning: Do not touch the gold contact area on the cartridges.

6Insert the new cartridges. Make sure the black print cartridge is secure in the right carrier and the color cartridge is secure in the left carrier, and then snap the lids closed.

7Lift the scanner unit and push the scanner support back while lowering the scanner unit until it is completely closed.

Lexmark’s All-In-One warranty does not cover repair of failures or damage caused by a refilled cartridge. We do not recommend use of refilled cartridges. Refilling cartridges can affect print quality and cause damage to the All-In-One. For best results, use Lexmark supplies.

E n g l i s h

13