Visual UpTime Select
ASE model 807-0202
OC-3c/STM-1 inline probe ASE
S i n g l e m o d e w i t h L i n k S a f e c a p a b i l i t i e s
Key features
•Inband management capabilities
•LinkSafe technology
•Multi-Protocol or IP Transport software
•Service Level Agreement (SLA) metrics
•Application analysis capability
•LAN management port
•Realtime events
The Visual UpTime® Select™ OC-3c/STM-1 LinkSafe™ inline probe ASE supports single mode ATM OC-3c physical lines, with SONET and SDH standards, at speeds up to 155 Mbps. This ASE supports Multi-Proto- col software for deployment in standard ATM networks and IP Transport software for deployment in ATM-based networks that use IP switching. The ASE also includes LinkSafe technology to protect circuit integrity in case of an ASE outage, as well as power failure notification.
The OC-3c/STM-1 inline probe ASE is designed for deployment at the network demarcation point between a subscriber’s CPE and the WAN. It can be deployed in ATM and mixed frame relay-ATM environ- ments. The figure below shows the ASE positioned at the edge of an inter-worked frame relay-to-ATM network, allowing for SLA messaging between a frame relay DLCI and an ATM VPI/VCI.
OC-3c inline probe model 202 front view
OC-3c inline probe model 202 rear view
Branch ASEs | | | LAN |
| | Visual |
| Frame to ATM | |
| Interworking | CPE | UpTime |
T1 | OC-3c | Select |
| ATM ASE | Router | server |
Frame | ATM | | |
Network | Network | | |
OC-3c inline probe model 202 on ATM/Frame network
Technical Data
