Fluke 807-0115 manual 4xT1/E1 inline probe ASE specifcations, Environment, Ports, Interface

4xT1/E1 inline probe ASE specifcations

General	Dimensions	8.16” (20.7 cm) x 9.0” (22.8 cm) x 1.62”(4.1 cm)
	Weight	7 lbs.
	Data Rate	T1: 1.536 Mbps, E1: 1.984 Mbps
	Timing Mode	Derived externally from the T1 or E1 network,
		user interface, or internally from the ASE.
Environment	Operating Temperature	0o to +40oC (+32o to +104o F)
	Storage Temperature	-20oto +55oC (-4oto +131o×F)
	Clearance Requirement	Minimum of 3” (7.62 cm) space on sides.
	Operating and Storage	10% to 80%, noncondensing
	Humidity
Power Requirements	Input	100 to 240 VAC
	Frequency	50/60 Hz
	Input Current Rating	0.5 amps
T1 Network Interface	Line Rate	1.544 Mbps ±50 bps synchronous
(Ports 1-4)
	Line Format	B8ZS line coding
	Framing	ESF framing formats
	Input Signal	0dB to -36dB
	Output Signal	0, -7.5dB, -15dB, -22.5dB LBO
	Pulse Density	AT&T 62411
	Connector	100 ohm 8-pin modular jack—USOC: RJ48C
	Timing	Network or User
	Channel Selection	1 to 24 channels in any combination
E1 Network Interface	Line Rate	2.048 Mbps ±102.4 bps synchronous
(Ports 1-4)
	Line Format	HDB3 line coding
	Framing	CRC4 or FAS framing formats
	Time Slot 16	CAS, CCS, or Data
	Input Signal	0dB to -43dB
	Output Signal	0dB
	Connector	120 ohm RJ-48C balanced and 75 ohm BNC unbal-
		anced coaxial
	Channel Selection	1-31 (includes channel 16) or 1-15, 17-31 (does
		not include channel 16)
Serial Port Interface	Baud Rate	19200 or 9600 bps
	Parity	8 data bits, no parity
	Stop Bit	1 stop bit
	Electrical Format	EIA RS-232, DTE
	Connector	RJ-45
Ethernet 10/100BaseT	Bite Rate	10 or 100 Mbps
Interface
	Connector	8-pin modular jack: RJ-48

What are ASEs?

ASEs (Analysis Service Elements) are data collection and network performance monitor- ing hardware devices placed on a wide area network (WAN) or Local Area Network (LAN) as part of the Visual UpTime Select system, which offers in-depth, real-time, and historical visibility into the performance of your applications infrastructure. In the system, data gathered by ASEs is stored in the Visual UpTime Select server and displayed and ana- lyzed from the Visual UpTime Select Web client. As a service level management tool, ASEs indicate when services are being met, provide warnings when services start to degrade, and send alerts when services are not met.

Hardware Warranties

Enhanced Gold, Bronze, and International Gold ASE hardware warranty service programs are available to help you maximize your investment in Visual UpTime Select. For more detailed warranty information, visit: www.flukenetworks.com/visualcustomercare

Ordering Information

For more details, please contact your Visual UpTime Select authorized reseller or Fluke Networks Sales at (800) 240-4010 or (301) 296-2300.

N E T W O R K S U P E R V I S I O N

Fluke Networks

P.O. Box 777, Everett, WA USA 98206-0777

Fluke Networks operates in more than 50 countries worldwide. To find your local office contact details, go to www.flukenetworks.com/contact.

©2006 Fluke Corporation. All rights reserved. Printed in U.S.A. 2/2006 2643418 D-ENG-N Rev A