Casablanca Fan Company C10GXXM VERSA TOUCH2 Control INSTALLATION, Control Bracket Installation

Models: C10GXXM

1 11
Download 11 pages 1.31 Kb
Page 8
Image 8
VERSA•TOUCH2® Control INSTALLATION

VERSA•TOUCH2® Control INSTALLATION

Versa•Touch2™ Hardware (not to scale)

 

 

Drywall

Wood

Screw

Screw

 

12v Battery

Screw

6-32 X 3/8"

6-32 X 1"

 

Anchor

1" (2)

(2)

(2)

W-72

W-72

6-32 (2)

 

 

 

 

 

 

 

Control

Control Holder

 

 

 

 

Control Bracket Installation

SAFETY FIRST: To reduce the risk of electrical shock, this fan must be installed with an isolating wall control/

switch. CAUTION! Do not use with wall dimmer.

WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid state speed control

device. Use only the control provided with this fan.

Step 17. Follow instructions for the type of transmitter control bracket you will be using.

Standard

Toggle

Switch

InnerControl Bracket Installation

Mounting

holes

Switch

Cover

Plate

Control

Bracket

Standard Light Switch

Step A. Remove the two screws holding the switch cover plate. Do not remove the cover plate.

Step B. Orient the control bracket as shown and line up the two inner mounting holes with those on the switch.

Step C. Insert and tighten the screws using the provided screwdriver.

Wall Installation

Step A. Locate a 2x4 wall stud in a convenient ­location.

Step B. Orient the control bracket as shown over the 2x4 stud.

Step C. Insert the 1" wood screws in either the inner or outer mounting holes and tighten using the provided screwdriver.

Rocker

Light

Switch

Outer

Mounting

Holes

Standard Light Switch Switch

Cover

ControlPlate

Bracket

Rocker Light Switch

Step A. Break off the two tabs by pushing outward.

Step B. Remove the two screws holding the switch cover plate. Do not remove the cover plate.

Step C. Orient the control bracket as shown and line up the two inner mounting holes with those on the switch.

Step D. Insert and tighten the screws using the provided screwdriver.

NOTE: The wall anchors and 6-32 x 1" screws may be used in situations where mounting to a stud is not possible. Use the inner mounting holes. After securing the anchor, discard the anchor’s pointed screws and use the 6-32 decor ovalhead screws supplied.

Anchor

Panhead

Screw

Drywall Anchor

Wood

Decor Ovalhead Screw

Screw 1"

6-32 X 1"

8

Page 8
Image 8
Casablanca Fan Company C10GXXM VERSA TOUCH2 Control INSTALLATION, Control Bracket Installation, Standard Light Switch