HANGING THE FAN
Step 8. To hang the fan body in the canopy, hold the fan body firmly and insert the ball into the canopy opening. Check that no wires were pinched. Rotate the fan body until the slot in the nylon ball fits into the pin opposite the canopy opening.
NOTE: The fan weight is 28 pounds.
ball
slotpin
CANOPY ELECTRICAL CONNECTIONS
Step 9a. Attach the fan wires to the ceiling fixture outlet box wiring by twisting the bare ends of the wires together and then securing with a wire nut. Test that the connection is secure by pulling on the wire nut. Connect in this order:
Step 9b. Wiring Connections
•GREEN leads from mounting plate and fan to GROUND conductor of power source. Secure with wire nut.
•WHITE wire from fan to white NEUTRAL wire in ceiling fixture outlet box. Secure with wire nut.
•BLACK power wire from fan to BLACK power wire in ceiling outlet box. Secure with wire nut.
2 BLACK WIRES
2 WHITE WIRES
3 GREEN WIRES | wire nut |
|
CANOPY HATCH INSTALLATION
Step 10. Tuck the wires into the canopy with the wire nuts pointed upwards, so that the WHITE, GREEN and BLACK wires are on opposite sides of the canopy and all wires are clear of the canopy opening.
Step 11. Install canopy hatch with the last canopy screw and lock washer. To do this, tilt the fan body away from the hatch opening.Tighten the screws firmly by hand only.
Step 12. Straighten the fan, then check to ensure that there is no move- ment between the canopy and ceiling or
canopy
hatch
lock washer
canopy screw
tilt the fan to
install last
canopy screw
6
