Cisco Systems SFS 3012 quick start Install the Element Manager GUI, push connector toward port

14

To remove a cable with a pull connector, grasp the connector with one hand and push it toward the port, then pull the latch away from the port with your other hand and gently wiggle the connector away from the port.

1. push connector toward port

2.pull latch away from port

3.pull connector away from port

Figure 1-12:Removing a Pull Connector

Install the Element Manager (GUI)

1.Verify that you have sufficient system resources:

•32 MB free RAM

•50 MB disk space + 50MB additional temporary space during installation

•300 Mhz processor

•800x600 screen resolution, 16bit color depth

2.Insert the Topspin CD-ROM into the CD-ROM drive of a server or workstation that has network access to a Topspin management port.