Installation and Connections

After unpacking the unit, and placing it on a solid surface capable of supporting its weight, you will need to make the connections to your audio and video equipment.

Audio Equipment Connections

We recommend that you use high-quality interconnect cables when making connections to source equipment and recorders to preserve the integrity of the signals.

When making connections to audio source equipment or speakers it is always a good practice to unplug the unit from the AC wall outlet. This prevents any possibility of accidentally sending audio or transient signals to the speakers that may damage them.

Important Note : In order to clearly identify all connectors and simplify nstallation, as per the new EIA/CEA-863 standard, all connections are colour coded as follows:

For Speakers and Audio In/Outputs: White (Left, speakers front) and Red (Right, speakers front). For Speakers: Green (Center), Blue (Left Surround) and Grey (Right Surround).

For Audio Output: Purple (Subwoofer).

For Composite Video In/Outputs: Yellow.

For Digital Audio In/Outputs: Orange.

1. Connect the analog output of a CD player to the CD inputs .

NOTE: When the CD player has both fixed and variable audio outputs it is best to use the fixed output unless you find that the input to the receiver is so low that the sound is noisy, or so high that the signal is distorted.

2.Connect the analog Play/Out jacks of a cassette deck, MD, CD-R or other audio recorder

to the Tape Input jacks . Connect the analog Record/In jacks on the recorder to the Tape

Output jacks

on the AVR.

3.Connect the output of any digital sources to the appropriate input connections on the AVR rear panel. Note that the Optical and Coaxial

digital inputs 4G may be used with a Dolby Digital or DTS source or the output of a conventional CD, MD or LD player’s PCM (S/P-DIF) output.

4.Assemble the AM Loop Antenna supplied with the unit as shown below. Connect it to the AM

and GND screw terminals .

5. Connect the supplied FM antenna to the FM

(75 ohm) connection . The FM antenna may be an external roof antenna, an inside powered or wire lead antenna or a connection from a cable system. Note that if the antenna or connection uses 300-ohm twin-lead cable, you must use a 300-ohm-to-75-ohm adapter to make the connection.

6. Connect the front, center and surround

speaker outputs to the respective speakers.

To assure that all the audio signals are carried to your speakers without loss of clarity or resolution, we suggest that you use high-quality speaker cable. Many brands of cable are available and the choice of cable may be influenced by the distance between your speakers and the receiver, the type of speakers you use, personal preferences and other factors. Your dealer or installer is a valuable resource to consult in selecting the proper cable.

Regardless of the brand of cable selected, we recommend that you use a cable constructed of fine, multistrand copper with an area greater than 2 mm2.

Cable with an area of 1.5 mm2 may be used for short runs of less than 4 m. We do not recommend that you use cables with an area less than 1mm2 due to the power loss and degradation in performance that will occur.

When connecting wires to the speakers, be certain to observe proper polarity. Remember to connect the “negative” or “black” wire to the same terminal on both the receiver and the speaker. Similarly, the “positive” or “red” wire should be connected to like terminals on the AVR and speaker.

NOTE: While most speaker manufacturers adhere to an industry convention of using black terminals for negative and red ones for positive, some manufacturers may vary from this configuration. To assure proper phase and optimal performance, consult the identification plate on your speaker or the speaker’s manual to verify polarity. If you do not know the polarity of your speaker, ask your dealer for advice before proceeding, or consult the speaker’s manufacturer.

We also recommend that the length of cable used to connect speaker pairs be identical. For example, use the same length piece of cable to connect the front-left and front-right or surround-left and surround-right speakers, even if the speakers are a different distance from the AVR.

7.Connections to a subwoofer are normally made via a line level audio connection from the

Subwoofer Output to the line-level input of a subwoofer with a built-in amplifier. When a passive subwoofer is used, the connection first goes to a power amplifier, which will be connected to one or more subwoofer speakers. If you are using a powered subwoofer that does not have line-level input connections, follow the instructions furnished with the speaker for connection information.

Note: Speaker sets with two front satellites and a passive subwoofer must be connected to the

front speaker outputs

only rather than to the

Subwoofer Output .

 

8.If an external multi-channel audio source with 5.1 outputs such as an external digital processor/decoder, DVD-Audio or SACD player is used, connect the outputs of that device to the

6-Channel Direct Inputs .

12INSTALLATION AND CONNECTIONS

Page 12
Image 12
Harman-Kardon 13828 owner manual Installation and Connections, Audio Equipment Connections, Output jacks, Subwoofer Output

13828 specifications

The Harman-Kardon 13828 is a remarkable piece of audio equipment that embodies the brand's commitment to premium sound quality and innovative technology. Designed for both audiophiles and casual listeners, this product combines aesthetic elegance with advanced engineering to enhance your listening experience.

One of the standout features of the Harman-Kardon 13828 is its powerful amplification system. The receiver offers a robust output that can drive large speakers without distortion, ensuring that you enjoy your music, movies, and games with crystal-clear clarity. The high dynamic range allows for a more nuanced and immersive auditory experience, whether you are listening to soft classical music or the booming sound effects of an action blockbuster.

Connectivity is another significant aspect of the Harman-Kardon 13828. It is equipped with multiple inputs and outputs, including HDMI, optical, and analog connectors, enabling you to connect a wide range of devices, from televisions to gaming consoles. This extensive connectivity also ensures compatibility with modern televisions and streaming devices, allowing you to easily integrate the receiver into your home theater system.

The Harman-Kardon 13828 also features Bluetooth technology, enabling wireless streaming from smartphones, tablets, and other Bluetooth-enabled devices. This convenience allows users to play their favorite playlists and tracks without the hassle of tangled wires, making it easier than ever to enjoy music throughout the home.

The receiver is built with advanced audio processing technologies that enhance sound quality. Features such as Dolby Atmos and DTS:X support provide an immersive 3D sound experience, making it ideal for creating a cinematic atmosphere at home. With these technologies, listeners can feel as if they are part of the action, with sounds coming from all directions.

Aesthetic appeal is also crucial, and the Harman-Kardon 13828 does not disappoint. Its sleek design complements modern home decor while standing out as a stylish centerpiece. The intuitive control interface, including a user-friendly remote and on-screen menu, allows for effortless navigation and customization of audio settings.

In summary, the Harman-Kardon 13828 is a powerful and versatile audio receiver that caters to diverse listening preferences. With its high-quality amplification, extensive connectivity options, advanced audio technologies, and sleek design, it is a worthy addition to any audio setup for those who seek both style and substance in their listening experience.