Manuals / Cisco Systems / Computer Equipment / Switch

Cisco Systems SFS 3012 quick start Contact Information, Laser Specs, Topspin P/N, Application

Models: SFS 3012

1 28

Download 28 pages 17.41 Kb

Page 8

Laser Specs

viii

CAUTION: Only open, modify, or service laser devices as specified in the manufacturer documentation.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser radiation exposure.

CAUTION: In order to ensure eye safety, only the fiber-optic transceivers indicated in the following table may be used.

Laser Specs

Table 3-1:

Topspin P/N	Application	Optical Parameters
48-00001-01	Fibre Channel	*CDRH/IEC Laser Class: 1/1
		Maximum Data Rate: 2.125 GB/s
		Wavelength: 850nm
		I/O connector:

* Standards used: CDRH - 21CFR Chapter I §1040.10; IEC - IEC60825-1:1994

Contact Information

Table 3-2:Customer Contact Information

Address	Topspin Communications, Inc.
	515 Ellis St.
	Mountain View, CA 94043

Telephone, Corporate Headquarters	(866)	TOPSPIN or (650) 316-3300

Fax	(650)	316-3269

Telephone, Technical Support	(800)	499-1473

Email, Technical Support	support@topspin.com

Web site, Support	http://support.topspin.com

Image 8

Cisco Systems SFS 3012 quick start Contact Information, Laser Specs, Topspin P/N, Application, Optical Parameters

Contents

Part Number OL-7716-01 Product ID Cisco SFS 3012 Multifabric Server SwitchQuick Start Guide Topspin 360 Quick Start Guide Release Copyright 2004 Topspin Communications, Inc. All rights reserved Document Version Part Number OL-7716-01 Product ID JulyContents Topspin 360 Package ContentsInstall Topspin 360 FRUs Regulatory NoticesPage Safety Information Regulatory NoticesFCC Statement Electrical CautionsThe power cable or power plug is damaged General Cautions Laser CautionsContact Information Laser SpecsTopspin P/N ApplicationRequirements Topspin 360 Package ContentsTopspin 360 Quick Start Install Topspin 360 FRUs Prepare the SiteRack the Topspin Figure 1-1 Positioning the Side Flanges Figure 1-2 Fastening the Side FlangesFigure 1-3 Rail Positioning Figure 1-4 Attaching Rails from the Front Figure 1-5 Attaching Rails from the Back Figure 1-6 Positioning the Chassis on the Rails Figure 1-7 Sliding the Chassis onto the RailsBoot your Topspin 360 and Configure Basic Connectivity Topspin-360config# interface mgmt-ethernet Assign a Static IP Address3. Enter the interface mgmt-ethernet command Connect InfiniBand Hosts Obtain an IP Address with DHCPTopspin-360# copy running-config startup-config 3. Enter the interface mgmt-ethernet commandFigure 1-9 Fully Installed IB Cable with Pinch Connector Figure 1-10 Fully Installed IB Cable with Pull ConnectorFigure 1-11 Removing a Pinch Connector 2. pull latch away from port 3. pull connector away from port Install the Element Manager GUI1. push connector toward port Configure the System Clock Configure Time and DateTopspin-360config# clock set 192210 25 05 Topspin-360# copy running-config startup-configTopspin-360# copy running-config startup-config Configure NTPTopspin-360config# ntp server-one Launch Chassis Manager To launch Chassis Manager, perform the following steps1. Launch your Web browser Figure 1-13 Chassis Manager Log-In WindowPage Index