Cisco Systems SFS 3012 Topspin 360 Quick Start, Requirements, Topspin 360 Package Contents

1

1

Topspin 360 Quick Start

This document describes the basic steps required to install and configure the Topspin 360 system.

•“Requirements” on page 1

•“Topspin 360 Package Contents” on page 1

•“Prepare the Site” on page 2

•“Install Topspin 360 FRUs” on page 2

•“Rack the Topspin 360” on page 3

•“Boot your Topspin 360 and Configure Basic Connectivity” on page 9

•“Connect InfiniBand Hosts” on page 11

•“Install the Element Manager (GUI)” on page 14

•“Configure the System Clock” on page 15

•“Launch Chassis Manager” on page 17

Requirements

To install the Topspin 360 into a rack, you require the following:

•one #1 and one #2 Phillips-head screwdriver

•one management workstation, such as a PC running terminal-emulation software

•the chassis cable kit (included)

•two people to lift the unit into the rack

Topspin 360 Package Contents

The following items arrive in your Topspin shipment: