Cisco Systems SFS 3012 quick start Configure the System Clock, Configure Time and Date, TopspinEM

15

3.Browse the CD-ROM. The GUI can be found in the following locations on the CD-ROM:

a.Linux/install_linux.bin

b.Solaris/install_solaris.bin

c.Windows/install.exe

4.Run the appropriate installation wizard:

a.On Windows, double-click install.exe.

b.On Solaris and Linux systems, enter sh ./install_yourOS.bin.

5.Follow the on-screen instructions.

6.Launch Element Manager.

a.On Linux platforms, change to the installation directory and run the Element Manager with

./TopspinEM.

b.On Windows platforms, click

Programs > Topspin Element Manager > TopspinEM.

7.Enter the DNS host name or IP address of the Topspin 360 and the community string for the unrestricted user. Your Server Switch uses the string secret by default.

8.Click the Open button. Element Manager opens and displays your Server Switch.

Configure the System Clock

You can configure the time of your system clock, or you can configure your Topspin 360 to obtain time and date information from an NTP server.

Configure Time and Date

To configure the system clock, perform the following steps:

1.Enter the enable command.

Example

Topspin-360> enable

Topspin-360#

2.Enter the configure command.

Example

Topspin-360# configure

Topspin-360(config)#

3.Enter the clock set command with the time and date that you want to apply.

Example

Topspin-360(config)#clock set 19:22:10 25 05 15

For more information, refer to the Topspin Command Line Interface Reference Guide.

4.Save the configuration to preserve it between reboots.

Example

Topspin-360(config)# exit

Topspin-360#copy running-config startup-config