Oki Telephony Adapter manual During installation, During use

Page 15

Cautions

During installation

All cables used to connect the equipment must be accessories of the equipment or suitable to fit the equipment.

Make sure the AC power plug is disconnected from the power outlet when connecting the FG cable to the unit.

When an exchange machine, such as PBX or EKTS is connected to the TEL port of VoIP-TA, the sound quality may deteriorate. Only one exchange machine should therefore be relayed between the VoIP-TA unit and telephones.

Interference noise may occur during telephone calls in areas that receive strong radio waves, such as near a broadcasting station or CB radio transmission. If calls are affected in this way, consult your network manager, an authorized sales agent or service office.

Do not install the VoIP-TA unit near equipment that generates magnetism or radio waves such as TV sets, radios, radio machines, microwave ovens, or inverter-type fluorescent lamps, as this may cause the unit to malfunction.

During use

Do not subject the unit to strong impact, such as dropping the unit.

Do not force cables to connect or disconnect as this may result in faults. The connector and port should join with reasonable ease.

When cleaning the exterior of the VoIP-TA, turn it off and disconnect the unit (by pulling the power plug, not the cord), wipe it with a water damp cloth and wipe it dry with a soft dry cloth. Do not use volatile thinner, alcohol or a silicon cleaner under any circumstances as it may result in damage, discoloration or deformation.

Installation 7

Image 15
Contents Version User’s GuidePage Page Page Contents Important Safety Instructions Important Safety Instructions Welcome to the world of Oki Internet telephony… IntroductionFeatures be used OutlineVoIP-TA LAN Front panelTEL Back panelALARM-LED Analogue Pstn II InstallationConnections Analogue telephone or G3 facsimile equipmentPersonal computer PC Power sourceDuring use During installationIII Placing Calls Via an IP networkGeneral operation Third party incoming call during another call ServicesCall transfer during a telephone call End-to-end service using Dtmf signalingPlacing Calls How to register the absent service Absent serviceLine selection Details of servicesPlacing Calls For Pstn line not receiving services using hookflash hooking Using the IP network only Symptom Items to check IV TroubleshootingTEL port SpecificationsImportant Equipment Information Warranty and Service Warranty periodFollowing the warranty period Sydney Office Oki Service OfficesHead Office London Office3PP3507-4104P002