Specifications

Remote Power Monitor Panel (RPMP)

M o n i t o r i n g S e r v i c e

		The unit front monitoring panel
Dimensions (WxHxD)	20" x 20" x 8"
		displays up to 4 lines of text, with up
	(50.8 cm x 50.8 cm x 20.32)
		to 20 characters per line. The large
Weight	48 lbs. (21 kg)
		viewing area allows easy monitoring

Operating Environment	32 – 104˚F (0-40˚C)
		of complete information.

L I E B E R T C O R P O R A T I O N

1050 DEARBORN DRIVE

P.O. BOX 29186

COLUMBUS, OHIO 43229

800.877.9222 PHONE (U.S. &

CANADA ONLY)

614.888.0246 PHONE (OUTSIDE U.S.) 614.841.6022 FAX

VIA LEONARDO DA VINCI 8

ZONA INDUSTRIALE TOGNANA

35028 PIOVE DI SACCO (PD)

ITALY

39 049 9719 111 PHONE

39 049 5841 257 FAX

23/F ALLIED KAJIMA BLDG.

138 GLOUCESTER ROAD

WANCHAI

HONG KONG

Monitored Parameters:

•Input Voltage (L-L)

•Output Voltage (L-L, L-N)

•Output Current

•Output Neutral

•Ground Current

•Output Frequency

•Output kVA

•Output Kilowatts

•Output Power Factor

•Output Percent Load

Alarms:

•Output Overvoltage

•Frequency Deviation

•Phase Sequence Error

•Phase Loss

•Output Undervoltage

•Output Overcurrent

•Neutral Overcurrent

•Ground Overcurrent

•Up To Four Normally Open Contact Closures

•One Normally Closed Contact Closure

•One Normally Open Form C Summary Alarm Contact

•One Normally Closed Form C Summary Alarm Contact

True Rms Monitoring.

Accurate representation of non-sinusoidal waveforms typical of computers and other sensitive loads.

Emergency Power Off.

When selected, the lighted, covered switch, will immediately power down the connected equipment by activating a shunt trip of the main input breaker (if the system is equipped with shunt trip capabilities).

Adjustable Alarm Threshold.

Adjusted using the RS-232-C service port. Adjustable parameters include: Output overvoltage, undervoltage, and overcurrent; Neutral overcurrent; Ground overcurrent; and Frequency deviation.

Field Programmable Custom Alarms.

Up to four normally open and one normally closed custom alarms are available. A custom alarm message of up to 20 characters is available for each alarm, programmable through the RS-232-C port.

Summary Alarms.

Form C summary alarm contact (one normally open, one normally closed) are provided.

Battery-Backed Alarms.

Alarm parameters are battery backed to prevent loss in case of a power outage.

Eia-422-A Communication Port.

Reliable communication up to 1000 meters.

Eia-232-C Service Port.

Allows for parameter adjustment.

Local And Centralized Monitoring.

Monitored parameters and alarms are displayed locally on the RPMP monitor panel. The RPMP can also communicate with the Liebert SiteScan Centralized Monitoring system, providing convenient monitoring and control for all your critical application needs.

852 2 572 2201 PHONE

852 2 831 0114 FAX

L I E B E R T W E B S I T E

http://www.liebert.com

2 4 X 7 T E C H S U P P O R T

800 222 5877 PHONE

614 841 6755 (OUTSIDE U.S.)

While every precaution has been taken to ensure accuracy and completeness in this literature, Liebert Corporation assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

All names referred to are trademarks or registered trademarks of their respective owners.

®Liebert and the Liebert logo are registered trademarks of the Liebert Corporation.

®Keeping Business in Business is a registered trademark of the Liebert Corporation.

The Emerson logo is a trademark and service mark of Emerson Electric Co.

SL-31040 (R5/02)

Printed in USA