Oki 260 manual Maintenance, Service, General information, Toner cartridge replacement

Page 47

Maintenance

Service

General information

For your safety, it is imperative to CAUTION refer to the security directives

presented in the Safety booklet.

To ensure that your machine is kept in the best conditions, it is recommended that you periodically clean the inner parts.

Please respect the following rules while using this machine:

-Do not leave the scanner cover open.

-Do not try to lubricate the device.

-Do not close the scanner cover violently or do not apply vibrations to the machine.

-Do not open the cartridge access cover while printing.

-Do not try to disassemble the machine.

-Do not use paper which has stayed in the tray for too long.

Toner cartridge replacement

Your machine comes with a current consumable management system. It tells you if your toner cartridge is close to its end of cycle.

The following messages will appear on your machine screen when the toner cartridge reaches the critical threshold (less than 10% toner cartridge left) and when it is empty:

TONER NEAR

 

TONER EMPTY

END

 

REPLACE <OK>

 

 

 

You can however change the toner cartridge at any time, before it reaches its end of cycle.

Always use the smart card provided when replacing the toner cartridge. The smart card contains the information necessary to reset the

Important level of toner. Replacing the toner cartridge without using a smart card may result in the consumable management system being inaccurate.

MB260

To replace the toner cartridge, proceed as shown below.

1 Insert the smart card provided with the new toner Maintenance cartridge as shown on the picture below.

-9

The following message appears:

CHANGE TONER?

YES=OK - NO=C

2Press OK.

The following message appears:

OPEN FRONT COVER

REPLACE TONER

3Stand in front of the device.

4Push on the left and right sides of the cover and pull it towards you.

5Raise and remove the toner cartridge from the machine.

6Unpack the new cartridge and insert it into the slot as indicated in the diagram below.

7Close the cover.

The following message appears:

HAVE YOU CHANGED

THE TONER? <OK>

8Press OK.

- 43 -

Image 47
Contents Page Consumables Dear customerDear customer Contents Maintenance Preface Environmental Information Software use license Laser Safety InformationPreface For North America For Europe/AsiaSymbols for the main power switch Positions of Safety labels on the machineEME Compliance for Canada Declaration of confomityDeclaration of Conformity Environmental Information Software use license Applicable law Registered trademarksProhibited reproductions Location conditions InstallationInstallation Safety During Operation Safety informationHandling the unit Paper recommendationsRules for use symbols Terminal description Accessing terminal menus Command panelFeed cassette paper insertion Packaging contentsDevice installation Paper delivery stop Cartridge installationDevice connection Device initial setupStarting your device Paper insertion in the manual input trayInstallation Copy CopyAdvanced FCT/COPY/RESOLUTION Special setup for the copyingResolution setup Zoom setupBrightness setup Analysis origin setup Paper tray selectionContrast setup Flat-bed analysis margins setupAdvanced FCT/SCAN. & PRINT/ Paper Format Top and bottom printing margins setupFormat paper setup Advanced FCT/SCAN. & PRINT/TOP PrintParameters Setup Read the counters Display the consumables statusCalibrate your scanner Sudoku Print the solution to a gridGames GamesRadio networks Wlan Network featuresNetwork features Type of radio networkCreating or rejoining a network Configure your networkConnect your Wlan adaptor Referring to or changing your network parameters Setup / Wlan / Parameters Hostname Setting up a multifunction machineMay be set up Setup / Wlan / Parameters / SecuritySetting up the PC Print your documents USB memory keyUSB memory key Use of the USB memory keyMedia / Delete / Manual KeySave a document on a USB memory key Delete your files located in the keyUSB memory key Introduction Configuration requirementsInstalling the full software package Installing drivers only PC FeaturesOn Windows 2000, XP and Vista Installing the drivers manuallyConnections Companion Monitor Multifunction Terminals SupervisionCompanion Director Device parameters Down menu.Features PCDisplay the consumable status Status of the connectionAnalysis with Scan To Companion Suite Pro functionalitiesDocument analysis Printing20 lbs/m² Letter paper Printing in duplex mode with the multifunction machineUninstall the drivers manually Software UninstallationUninstall the software from your PC Uninstall the drivers from your PCPC Features General information MaintenanceService Toner cartridge replacementPrinter cleaning CleaningPrinter issues PC printing via USB connection PC printing issuesPaper jam PC printing via Wlan connection MaintenanceEnvironmental specifications SpecificationsPhysical specifications Electrical specificationsReference paper Consumable specificationsIBC Pobřežní 186 00 Praha Czech Republic Tel. +420 224 Harman Sokak, No4, Kat6 Levent, Istanbul Tel +90 212 279 07099701 iss.2

260 specifications

The Oki 260 is a robust, high-performance printer designed for small to medium-sized businesses that demand reliability and efficiency in their printing operations. This monochrome printer stands out with its advanced features, making it an ideal choice for various office environments.

One of the main features of the Oki 260 is its impressive print speed. Capable of producing up to 40 pages per minute, users can expect swift document processing, ideal for high-volume printing tasks. This efficiency is complemented by Oki's Digital LED technology, which offers excellent print quality while reducing waste and energy consumption. The precision printing capability ensures that even complex text and graphics are rendered sharply and clearly.

Moreover, the Oki 260 supports various media sizes and types, accommodating everything from standard letter-sized documents to heavier cardstock and envelopes. Its versatility allows businesses to handle diverse printing needs without the need for multiple devices. Users can also benefit from a maximum paper capacity of 250 sheets, along with an efficient automatic duplexing feature for double-sided printing, reducing paper usage and costs.

In terms of connectivity, the Oki 260 offers multiple options to suit different office setups. With both USB and network printing capabilities, users can easily integrate the printer into their existing systems. The printer is also compatible with various operating systems, ensuring that it can be easily used by different types of computers and devices.

Moreover, the Oki 260 is equipped with advanced security features to protect sensitive documents. It includes options for secure printing, which requires users to enter a PIN to release their jobs, providing an extra layer of confidentiality.

In conclusion, the Oki 260 stands out in its class as a reliable, high-speed monochrome printer built for efficiency and versatility. With its advanced printing technology, capacity for various media types, and robust security features, it is well-suited for businesses seeking to enhance their productivity without compromising on quality. Whether printing reports, presentations, or other essential documents, the Oki 260 proves to be an invaluable asset in any professional printing environment.