Philips LTC 2600 Main Menu 1.00 Setup 1 Quick Setup Advanced Setup, ChooseSELECT MoreV ExitZOOM

LTC 2600 Series Section 2 Installation

4.The multiplexer is programmed through on-screen menus which include access to on-screen HELP information. The menus will be displayed on Monitor A in the system.

5. To access the menu screens, press the ALT key followed by the MENU key .

6.The Main Menu (as shown below) displays two setup options: Quick Setup and Advanced Setup.

-Quick Setup will provide all the basic programming necessary for typical systems

-Choose Advanced Setup when configuration requires such functions as alarm, motion, etc.

To perform the Advanced Setup for customized system configurations, first select Advanced Setup from the main menu; then program the Time/Date,Autoset, and VCR setups as described in the following paragraphs; and then refer to Section 4 for additional programming instructions.

MAIN MENU 1.00 SETUP 1 >QUICK SETUP

ADVANCED SETUP

Choose:SELECT More:V

Exit:ZOOM

Each menu screen includes two lines at the bottom showing the options that can be selected. These options are:

CHOOSE	Press SELECT key
MORE	Use direction keys
EXIT	Press ZOOM key
HELP	Press ALT key
DEFAULT	Press FREEZE key
ENTER CHARACTER	Use direction keys to scroll through characters
When the SELECT key	is pressed, all programmed settings are saved into non-volatile memory.

NOTE: A complete listing of all menu trees is provided at the back of the manual in Appendix D.

7. For typical video multiplexer system operations, select the Quick Setup option from the Main Menu.

QUICK SETUP SETUP 1 >TIME/DATE

AUTOSET

VCR SETUP

Choose:SELECT More:V

Exit:ZOOM

NOTE: The Quick Setup program includes: Time/Date,AutoSet, and VCR setup. Quick Setup guides you through all of these steps. If for any reason you need further information, consult the built-in HELP feature by pressing the ALT key .

13