Primera Technology Automated Optical Disc Printing System Hardware Setup, Applying Power

Page 12

TOC

INDEX

c.Double-click on the AutoPrinterPro Installer.mpkg file icon. Follow the on-screen instructions.

d.The volume containing the operating system should be selected for installation. Click the Continue button. All components will be installed to their proper locations.

e.Once the installation has completed, click Quit.

You have successfully installed all the necessary software! Section C below will describe how to connect the Printer to your Mac.

C. HARDWARE SETUP

Step 1: Applying Power

•Locate the power cord supplied with your Printer.

•Plug the adapter into a surge protected outlet, and plug the power plug into the power port on the rear panel of the Printer.

Step 2: Loading Media (Discs)

NOTE: Your Printer can print directly onto virtually any brand of inkjet printable-surface CD/DVD media. However, different brands of discs have different printable coatings. Because of this, you may need to adjust the printer driver settings to accommodate your specific brand of CD/DVD media. Refer to Section 3A and 4C for further printer driver information.

Due to the wide variety of printable-surface CD/DVD media, you may find that certain brands of discs provide higher print quality than others. For maximum print quality, use CD/DVD media authorized by Primera.

8Hardware and Software Setup

Image 12

Contents For Macintosh and PC Printing History Table of Contents Interactive Feature Getting Started Thank YOU…Choosing a Good Location Unpacking and Inspection Identifying the Parts Front Panel and TopRear Panel PC System RequirementsMAC System Requirements TOC Index Hardware and Software Setup Installing the PC SoftwareInstalling the MAC Software Set-UpHardware Setup Applying PowerLoading Media Discs TOC Index Connecting the USB 2.0 Cable/Installing the Driver If you are using a PCIf you are using a Macintosh Installing Ink Cartridges Do not Touch the Copper AreaSetting UP the Printer Driver Printing Discs on a PCPaper Size Resolution Non-printable Outer MarginDisc Surface Quality Cartridge TypeInk Saturation Calibration OptionsInner Diameter Cartridge AlignmentBack Enable Ink Low Warning Clean/Change Cartridges & Check Ink LevelsChange Cartridges Clean/Purge DetailsDisc Output Location Creating a Print Label Using Surething Printing from Other Graphics Programs Using Kiosk Mode TOC Index Printing Discs on a Mac Printed Label Format RequirementsPrinting from ANY Application Printer OptionsPrint Settings Cartridge to use Print QualityDisc Surface Quality IntensityConfig Utility Save As DefaultRestore Defaults Configuration UtilityClean Cartridge Change Cartridge Alignment Calibration PrintImage Alignment Tough lines whose TOC Index Interpreting the Printers Indicator Lights LEDMaintenance Cleaning the PrinterCleaning the INK Cartridges Clearing a Media JAM Transporting the PrinterTechnical Specifications DVD-R, DVD RAM, DVD+R, DVD+RIndex