Hatco GRH, GRAL, GRAHL, GRNH manual Permanent Surface Mount, Tubular Stand Mounting

Page 16

INSTALLATION

PERMANENT SURFACE MOUNT

Tubular Stand Mounting

Tubular stand mounting permanently attaches the unit to a countertop or serving table. All wiring may be concealed within the tubular stand.

Tubular stands are available in non-adjustable heights from 10"-16" (254-406 mm) or in adjustable heights from 10"-14" (254-356 mm).

NOTE: Tubular stands are not field retro-fittable.

NOTE: If wiring is to be concealed, a 1" (25 mm) diameter hole must be provided in the mounting surface, centered under the leg flange nearest the electrical wiring hookup.

1.Position the unit upside-down on a flat surface.

2.Units for this application are supplied with the conduit attached. Conduit should not be removed.

3.If applicable, route flexible conduit through the leg opening. Pull the leg up to the underside of the warmer. (See Figure 15.)

4.Secure legs to warmer using screws supplied.

5.If applicable, route the flexible conduit through opening in countertop.

6.Secure the legs to the mounting surface.

NOTE: The adjustable legs can be raised or lowered by turning the locking set screw counterclockwise one turn with an allen wrench, and then raising or lowering the unit to the desired height and retightening the screw. Do not loosen the screw more than necessary.

NOTE: Two pairs of legs will be needed for mounting dual units.

Covers

Locking

Screw

Non-Adjustable Leg

Adjustable

Leg

Flexible Conduit

Figure 15. Tubular Stand Mounting

Form No. GRM-0707

14

Image 16
Contents GLO-RAY Important Owner Information ContentsIntroduction Important Safety Information GR a H L-24 D Model DesignationModel Descriptions GRA-24 ModelSpecifications GRA MODELS-ELECTRICAL Rating Chart Grah MODELS-ELECTRICAL Rating ChartGral MODELS-ELECTRICAL Rating Chart Grahl MODELS-ELECTRICAL Rating ChartGRA-XXD Models Electrical Rating Chart GRAH-XXD Models Electrical Rating ChartModel GRAL-18D Model GRAL-24DModel GRAL-30D Model GRAL-36DGRN MODELS-ELECTRICAL Rating Chart Grnh MODELS-ELECTRICAL Rating ChartDimensions Width Depth Height ModelsUnpacking InstallationLocation Legs or C-Legs Under Shelf MountingOver Steam Table Portable Surface Mount AssemblyLeg Stand Permanent Surface Mount Tubular Stand MountingPass Thru Undershelf MountingHanger Tab Mounting Hardwired Units with Built-In Switches Hardwired Units with Remote SwitchesDual Units with Built-In Switches Dual Units with Remote SwitchesCeiling Mounting Chain Mounting with S HookPower Cord and Plug Models Electrical Wiring HOOK-UPConduit Connection Remote Mounted Control Box RMB OperationLights Cleaning MaintenanceDisplay Light Bulb Replacement Accessories Remote Control EnclosuresIndicator Light Incandescent LightTroubleshooting Guide Symptom Probable Cause Corrective ActionTroubleshooting Guide Hatco Limited Warranty Product WarrantyForm No. GRM-0707 Hatco Authorized Parts Distributors Hatco Corporation

GRH, GRAH, GRAL, GRAHL, GR specifications

Hatco is a leading manufacturer of commercial kitchen equipment, and its range of countertop food warmers, including the GRA, GR, GRAHL, GRH, and GRNH models, demonstrates innovation and functionality. These models are designed to keep food items at optimal serving temperatures while maintaining quality.

The Hatco GRA series, particularly known as the "Glo-Rite" food warmers, incorporates unique heat lamp technology. This series is available in various sizes and configurations, catering to the needs of diverse foodservice environments. The GRA models feature high-quality infrared heating elements that provide even and efficient heating, ensuring that food retains its appealing appearance and taste.

The GR series is an extension of the capabilities found in the GRA models, specially designed for different food types. These warmers are constructed from durable stainless steel, ensuring longevity and ease of cleaning. With adjustable temperature controls, operators can customize the warmth to suit specific food items, from buffets to catered events.

The GRAHL model combines the GRA features with a heated glass display. This design not only keeps food warm but also showcases it beautifully, enhancing the visual appeal for customers. Its clear glass allows for excellent visibility while ensuring that temperature is maintained, making it ideal for self-service operations.

The GRH series includes models with a hinged design, allowing for easy access to food items. This feature is particularly beneficial in high-traffic environments where quick serving is essential. The GRH warmers are also designed to accommodate larger portions or multiple dishes, providing flexibility in food presentation.

The GRNH model is designed for maximum efficiency and functionality. This model offers high-performance insulation, which helps maintain warmth while reducing energy consumption. This technology not only provides cost savings but also aligns with environmentally friendly practices common in today's food service industry.

Overall, the Hatco GRA, GR, GRAHL, GRH, and GRNH lines exemplify reliable and effective food warmer solutions. They are built with advanced technologies, durable construction, and user-friendly features that meet the high demands of modern foodservice operations. Whether in restaurants, catering businesses, or buffets, these warmers ensure that food is always served hot, fresh, and appealing, enhancing overall customer satisfaction.