Hatco GRAHL, GRH, GRAL, GRNH manual Ceiling Mounting, Chain Mounting with S Hook

Page 19

CEILING MOUNTING

Chain Mounting

WARNING

To avoid any injury or damage to the unit when using chains for installation, the chains must have sufficient strength and be securely fastened, or the unit could become loose or fall. Do not place anything on top of warmers supported by chains.

Chain supplied by Hatco is constructed of sufficient strength to securely hold the weight of the unit only when properly mounted.

1.Securely fasten the chain to the surface above the desired area. Be sure chain is located so the unit will be suspended at a safe and proper distance from walls, counter and food.

2.Loosen but do not remove the screws securing the mounting tabs on each end of the unit. Extend the tabs, then tighten the screws securely. (See Figure 20.)

3.Attach a short piece of connecting chain to each pair of mounting tabs. (See Figure 20.)

4.Attach overhead chain to the connecting chain between the two mounting tabs. Repeat for other end of unit. (See Figure 20.)

NOTE: Additional chain will be needed for dual Glo-Ray units.

Chain Mounting with “S” Hook

Units supplied from Hatco with power cord attached come with the connecting chain and “S” hook already attached to the mounting tabs.

1.Securely fasten the chain to the surface above the desired area. Be sure chain is located so the unit will be suspended at a safe and proper distance from walls, counter and food.

2.Attach both “S” hooks to the overhead chains and ensure the unit is level. (See Figure 20.)

BREATH PROTECTOR (Optional)

1.Remove protective paper from the acrylic surfaces.

2.Position the acrylic breath protector into the channel on the warmer with the mounting holes aligned. (See Figure 21.)

3.Secure the breath protector using the weld screws and acorn nuts provided. Tighten weld screws until snug. Do not overtighten.

INSTALLATION

Overhead Chain

Connecting Chain

Mounting Tabs

“S” Hook

Figure 20. Mounting with Chains

Weld Screws

GLO-RAY

CAUTION - HOT

O

Breath Protector

Acorn Nuts

Figure 21. Installing Breath Protectors

17

Form No. GRM-0707

Page 18 Page 20
Image 19
Page 18 Page 20
Contents GLO-RAY Important Owner Information ContentsIntroduction Important Safety Information Model Designation GR a H L-24 DGRA-24 Model Model DescriptionsSpecifications Grah MODELS-ELECTRICAL Rating Chart GRA MODELS-ELECTRICAL Rating ChartGrahl MODELS-ELECTRICAL Rating Chart Gral MODELS-ELECTRICAL Rating ChartGRAH-XXD Models Electrical Rating Chart GRA-XXD Models Electrical Rating ChartModel GRAL-36D Model GRAL-18DModel GRAL-24D Model GRAL-30DGrnh MODELS-ELECTRICAL Rating Chart GRN MODELS-ELECTRICAL Rating ChartWidth Depth Height Models DimensionsUnpacking InstallationLocation Legs or C-Legs Under Shelf MountingOver Steam Table Portable Surface Mount AssemblyLeg Stand Tubular Stand Mounting Permanent Surface MountPass Thru Undershelf MountingHanger Tab Mounting Dual Units with Remote Switches Hardwired Units with Built-In SwitchesHardwired Units with Remote Switches Dual Units with Built-In SwitchesChain Mounting with S Hook Ceiling MountingPower Cord and Plug Models Electrical Wiring HOOK-UPConduit Connection Remote Mounted Control Box RMB OperationLights Cleaning MaintenanceDisplay Light Bulb Replacement Incandescent Light AccessoriesRemote Control Enclosures Indicator LightSymptom Probable Cause Corrective Action Troubleshooting GuideTroubleshooting Guide Product Warranty Hatco Limited WarrantyForm No. GRM-0707 Hatco Corporation Hatco Authorized Parts Distributors

GRH, GRAH, GRAL, GRAHL, GR specifications

Hatco is a leading manufacturer of commercial kitchen equipment, and its range of countertop food warmers, including the GRA, GR, GRAHL, GRH, and GRNH models, demonstrates innovation and functionality. These models are designed to keep food items at optimal serving temperatures while maintaining quality.

The Hatco GRA series, particularly known as the "Glo-Rite" food warmers, incorporates unique heat lamp technology. This series is available in various sizes and configurations, catering to the needs of diverse foodservice environments. The GRA models feature high-quality infrared heating elements that provide even and efficient heating, ensuring that food retains its appealing appearance and taste.

The GR series is an extension of the capabilities found in the GRA models, specially designed for different food types. These warmers are constructed from durable stainless steel, ensuring longevity and ease of cleaning. With adjustable temperature controls, operators can customize the warmth to suit specific food items, from buffets to catered events.

The GRAHL model combines the GRA features with a heated glass display. This design not only keeps food warm but also showcases it beautifully, enhancing the visual appeal for customers. Its clear glass allows for excellent visibility while ensuring that temperature is maintained, making it ideal for self-service operations.

The GRH series includes models with a hinged design, allowing for easy access to food items. This feature is particularly beneficial in high-traffic environments where quick serving is essential. The GRH warmers are also designed to accommodate larger portions or multiple dishes, providing flexibility in food presentation.

The GRNH model is designed for maximum efficiency and functionality. This model offers high-performance insulation, which helps maintain warmth while reducing energy consumption. This technology not only provides cost savings but also aligns with environmentally friendly practices common in today's food service industry.

Overall, the Hatco GRA, GR, GRAHL, GRH, and GRNH lines exemplify reliable and effective food warmer solutions. They are built with advanced technologies, durable construction, and user-friendly features that meet the high demands of modern foodservice operations. Whether in restaurants, catering businesses, or buffets, these warmers ensure that food is always served hot, fresh, and appealing, enhancing overall customer satisfaction.
Top Page Image Contents