Philips dimensions Introduction, Description, View of the ITLPC2138

Page 3
Introduction

Introduction

Philips LPC2138 Target Board is an evaluation and a development system for Philips ARM7TDMI-S based LPC2138 microcontroller. The ITLPC2138 package consists of a USB cable and a target board populated with Philips LPC2138 CPU, minimum peripherals, JTAG debug connector, ETM trace connector and an on-board integrated iSYSTEM debugger.

The user can write and debug the application using the on-board integrated iSYSTEM debugger, which connects to the PC through the USB connection. The board requires no external power supply since it’s powered from the PC USB port.

An external ARM7TDMI-S debugger (including e.g. ETM support) can be used for debugging as an alternative to the on-board integrated debugger.

Description

View of the ITLPC2138

Figure 2: Top View of the ITLPC2138

© iSYSTEM, December 2005

3/16

Image 3
Contents V1.4 User’s GuideDimensions Philips LPC2138 Target BoardContents Introduction DescriptionView of the ITLPC2138 Block Diagram Components List NameDescription J12 Manufacturing purpose connections Power SupplyJumper & Connector Descriptions J21 16 Pin LCD Connector see connectorsPin No. Symbol ConnectorsDB9 male connector UART1 P5 3-pinserial connector UART0 J14Pin No 16-pinLCD connector J2120-pinJTAG Debug Connector P3 Symbol38-pinMictor JTAG Debug & ETM Trace Connector P2 CPU expansion connectorsFigure 4 Expansion connectors 10/16 Schematic11/16 Licensing the on-boardintegrated debuggerUse of the on-boardintegrated debugger Setting up a debug environment for the first time Use of an external debuggerTroubleshooting 15/16 16/16 iSYSTEM. All rights reserved
Related manuals
Manual 13 pages 47.16 Kb