o STANDBY: TV will be automatically switched to STANDBY mode (even if the last status was ON) whenever the mains power is turned ON or resumed after a power interruption.
o ON: Similar function as “FORCED ON” but the remote control STANDBY key function is enabled when TV is set to
this mode.
•VOLUME INDICATOR: To display volume indicator when adjusting volume, select “YES”. Select “NO” to hide the volume indicator.
•CHANNEL DISPLAY: CHANNEL DISPLAY values can be: NUMBER, LABEL, ALL, and NONE.
Picture and Sound settings
In this sub menu, the Picture and Sound settings of the TV can be selected.
PICTURE/SOUND
BRIGHTNESS | 50 |
COLOUR | 50 |
CONTRAST | 50 |
SHARPNESS | 50 |
TINT | 50 |
ACTIVE CONTROL | YES |
TREBLE | 50 |
BASS | 50 |
BALANCE | 50 |
AVL | ON |
•BRIGHTNESS: Changes picture brightness.
•COLOUR: Changes the intensity of the colour.
•CONTRAST: Changes the difference between the light and dark
•tones.
•SHARPNESS: Adjusts to improve detail.
•TINT: Adjusts the colour balance in an image.
•ACTIVE CONTROL: Allows adjustment for picture noise reduction.
Notes:
COLOUR and SHARPNESS are not available in the PC mode
•TREBLE/BASS: Adjusts the level of treble and bass effects on the TV’s sound output.
•BALANCE: Adjusts the balance of the right and left speakers to best suit your listening position.
•AVL (Automatic Volume Leveller): Limits the increase in sound level especially during programme change or advertising slots.
Security settings
In this sub menu, the Security settings of the TV can be configured.
SECURITY
SECURITY | STANDARD |
KEYBOARD LOCK | NO |
REMOTE CONTROL LOCK | NO |
VIDEO OUT MUTE | NO |
ENABLE GUEST MENU | YES |
ENABLE TELETEXT | YES |
•SECURITY: The “SECURITY” function allows the user to select one of two states - “HIGH” or “STANDARD”.
The default is “STANDARD”.
o When the set is in the SECURITY HIGH mode, the SETUP menu can only be accessed by a Institutional
o When the set is in the SECURITY STANDARD mode, the SETUP menu can be accessed with a guest remote control by a sequence of commands (3 1 9 7 5 3 MUTE).
•KEYBOARD LOCK: Disables the television’s local keyboard for volume and program control.
•REMOTE CONTROL LOCK: Locks all buttons on the guest remote control.
•VIDEO OUT MUTE: Disables video out signal from all sources.
•ENABLE GUEST MENU: Enables the Guest Menu.
•ENABLE TELETEXT (only if applicable) : Enables Teletext.
15