Communication

Setup menu items

	SETUP

LANGUAGE	ENGLISH
COMMUNICATION	>
NO. OF CHANNELS	>
CHANNEL INSTALL	>
CONFIGURATION	>

•LANGUAGE: Select the language of the Setup menu.

Options are “ENGLISH”, “MELAYU” and “CHINESE”

Note: The Chinese Language is for the Guest Menu only.

•COMMUNICATION: Please refer to the section for detail.

•NO. OF CHANNELS: This sub menu allows setting the number of TV, PAY-TV, INFO and RADIO channels.

•CHANNEL INSTALL: In the CHANNEL INSTALL sub-menu, various channel settings can be set. Please refer to the section on Channel Installation for further details.

•CONFIGURATION: In the CONFIGURATION menu, various settings and features of the TV can be adjusted. Please refer to the section on Configuration for further details.

Communication

COMMUNICATION	OFF
STORE	>

•COMMUNICATION: The Communication options SP-SPI, SP-I2C, HM-Link, Multi RC, Smart RC and Serial Express. SP-SPI, SP-I2C and HM-Link are for enabling interactive applications. Multi- RC is a feature to program the TV and RC for a one to one match- ing in a multi TV environment. Multi-RC allows up to four unique groups of TV-RC matching. For normal stand-alone applications select “OFF” option under the Communication sub menu.

Multi RC Set-up procedure:

1.Press the RC Menu key together with one of the coloured keys (Red/Green/Yellow/Blue) for at least 4 seconds.

2.Access the TV Set-Up Menu and select Multi RC option

3.Under Multi RC sub-menu, select the corresponding colour to match the colour selected in Step 1

Notes:

1.SP-SPI and SP-I2C refers to the Philips communication protocols that are used in conjunction with the Data 1 (RJ12) or/and Data 2 (RJ45) connectivity to an external STB or Smart Card Xpress Box.

2.HM-Link is mainly used in conjunction with Data 1 (RJ12) connectivity to an external STB. Serial Express is used with the RS232 (D89) connector for connectivity to an external STB.

3.Multi RC feature requires specific remote control models RC2887/RC2886.

4.The Multi RC default colour code is BLUE (for TV and RC). The RC colour code will be automatically reset to default BLUE colour when the RC batteries are changed.

5.To check the colour code status of TV and RC, just press the OK button on the RC for at least 4 seconds.

•STORE: To save your settings by pressing right key.

•RS232 ID: To setup the TV ID.

DCM TYPE: To communicate with Smartport. (It’s available in SP-SPI and SP-I2C)