· Welcome Message, Display, Clear | Philips 27HT4000D, 27HT7210D

TV SETUP MENU & SUB-MENUS (CONTINUED)

·WELCOME MESSAGE (>)

A welcome message (maximum of 20 characters, 2 lines) can be programmed to appear on the TV screen when the TV is powered on. The message remains on the screen until any button on the TV front panel or remote control is pressed.

This is how to set the Welcome Message :

1Press cursor Æ or Í on the remote control to invoke the WELCOME MESSAGE sub-menu.When the WELCOME MESSAGE setup menu is highlighted.

Press cursor Î or ï on the remote control to select the

2desired MESSAGE sub-menu item (eg. LINE1, LINE2).

3When DISPLAY is highlighted, press cursor Æ or Í on the remote control to select YES or NO. When YES is selected, WELCOME MESSAGE is enabled. Choose NO to disable

WELCOME MESSAGE.

Note : If Welcome Message is enabled but both LINE 1 and

LINE 2 are blank (or consist entirely of space characters), no

4Select message LINE 1 or LINE 2. Press cursor Æ on the remote control to start the first character. A blinking "-" will

appear indicating that you are in the edit mode. Press cursor

Îor ï to select a character at the given position. To movemessage will appear.

to a desired character position press Æ or Í

Note : When you cursor to the left or right margins of the edit space, the blinking "-" will disappear and ">" will re-appear at the end of the menu line. You can then cursor Î or ï to the next or previous

5Select CLEAR to erase the entire message.line in the MESSAGE sub-menu.

·CHANNEL GUIDE (NO / YES / POWER ON)

The channel guide feature provides an on-screen summary listing of the RF (tuner) channels that are currently in the channel ring (see CHANNEL INSTALL -> CHANNEL RING) and have been assigned labels (see

CHANNEL INSTALL -> LABEL).

NO	: Channel Guide is not displayed when CH GUIDE
	on the remote control is pressed and "NOT
	AVAILABLE" message appears on the TV screen.
YES	: When CH GUIDE button on the remote control
	is pressed the channel guide is displayed for
	approximately 10 seconds, or until a command is
	received from the remote control again. All RF
	(tuner) channels that are in the same channel ring,
	and have labels will appear in the channel list.
POWER ON	: The channel guide appears automatically at power-
	on, and remains on-screen for approximately 10
	seconds or until a remote control command occurs.
	The channel guide also appears when CH GUIDE
	button on the remote control is pressed.

Note 1 : To appear in the channel guide, an RF (tuner) channel must be assigned a label, and must be saved in the channel ring.

Note 2 : Only RF (tuner) channels will be listed in the channel guide. Video inputs (eg. AV2, S-VIDEO, CVI, FRONT A/V) will not appear.

	WELCOME MESSAGE
DISPLAY	NO / YES
LINE 1	PHILIPS	>
LINE 2	INSTITUTIONAL TV	>
CLEAR		>

DISPLAY

NO / YES

LINE 1, 2

PHILIPS

CLEAR

	CHANNEL GUIDE
TV2	PBSETPTV >
TV5	CBS	>
TV6	QVC	>
TV7	WB	>
TV13	ABC	>
TV14	WGN	>
TV54	C-SPAN	>
EXIT

CH GUIDE TO SCROLL DOWN