Philips 236V4 user manual Safety precautions and mainte- nance, Operation

Page 3

1. Important

1. Important

This electronic user’s guide is intended for anyone who uses the Philips monitor.Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.

The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name and model and production number of the product.

1.1Safety precautions and mainte- nance

Warnings

Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor.

Operation

Please Keep the monitor out of direct sunlight, very strong bright lights and away from any other heat source. Lengthy exposure to this type of environment may result in discoloration and damage to the monitor.

Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.

Do not block the ventilation holes on the cabinet.

When positioning the monitor, make sure the power plug and outlet are easily ac- cessible.

If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.

Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Customer Care Consumer Information Center)

Do not subject the monitor to severe vibration or high impact conditions during operation.

Do not knock or drop the monitor during operation or transportation.

Maintenance

To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving your moni- tor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel.

Unplug the monitor if you are not going to use it for an extensive period of time.

Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor.

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.

If your monitor gets wet, wipe it with dry cloth as soon as possible.

If foreign substance or water gets in your monitor, please turn the power off immedi- ately and disconnect the power cord.Then, remove the foreign substance or water, and send it to the maintenance center.

Do not store or use the monitor in loca- tions exposed to heat, direct sunlight or extreme cold.

In order to maintain the best performance of your monitor and use it for a longer life- time, please use the monitor in a location that falls within the following temperature and humidity ranges.

1

Image 3
Contents Troubleshooting & FAQs Table of Contents Operation Safety precautions and mainte- nanceNotational Descriptions Disposal of product and packing material Waste Electrical and Electronic EquipmentWeee Installation Setting up the monitorOFF Operating the monitorModel 236V4LHA OSD MenuDisplay interface is shown as below Model 236V4L Model 236V4LARemove Base Stand and Base Remove the Base StandPress the release button to detach the base column 100mm Image Optimization SmartContrastPhilips SmartControl Lite Start with Standard pane Adjust menu Color menu Image Optimization At startup will not load when this box is unchecked Disabled Exit Close SmartControl Lite Task Tray Menu Disabled YES Technical SpecificationsTFT-LCD LEDSelective models, UL/cUL, BSMI, ISO9241-307 Mtbf30,000hrs Environmental Rohs YES EpeatResolution & Preset Modes Vesa Power ManagementOnly for selective models Regulatory InformationLead-free Product Brand owner offers take-back optionsGS EK1-20002011 GS mark requirement Epeat Electronic Product EnvironmentalCommission Federale de la Communication FCC Declaration Federal Communications Commission FCC Notice U.S. OnlyRegulatory Infomation Varning VaroitusAchtung Beim Aufstellen EU Energy Label China RoHSTypes of Pixel Defects Customer care and warrantyPhilips’ Flat Panel Monitors Pixel Defect Policy Pixels and Sub pixelsDark subpixel Black Dot DefectsProximity of Pixel Defects Total bright dot defects of all typesCustomer Care & Warranty IBA FujitsuCPS AL Shahd Computer L.L.C Contact Information for Apmea regionSatisfactory, you can do manual adjustments via the OSD menu TroubleshootingImage appears distorted.Text is fuzzy or blurred General FAQsQ10 Are Philips LCD monitors Plug-and- Play? Q7 How should I clean the LCD surface?Troubleshooting & FAQs Koninklijke Philips Electronics N.V. All rights reserved