Philips 19S4LA, 19S4LC Detach the base stand away from the base column by, Remove the base

2. Setting up the monitor

2.3Remove base stand and base (19S4L/19S4LA)

Remove the base stand

Before you start disassembling the monitor base, please follow the instructions below to avoid damage or injury.

1.Place the monitor face down on a smooth surface, taking care to avoid scratching or damaging the screen.

2.Detach the base stand away from the base column by:

(1)Use your fingers to loosen the screw located at the bottom of the base.

(2)Gently move up-and-down to release the latch that locks the base and pull the base away from the base column.

Remove the base

Condition:

•For VESA standard mounting applications

Remove the 4 screws and then remove the base from the monitor.

Note

This monitor accepts a 100mm x 100mm VESA-Compliant mounting interface.

100mm

100mm