AAAttaching the toroidal ferrite core to the power cord of the M7
Attaching the Toroidal ferrite core to the power cord of the M7 helps prevent RF interference from radio signals.
ETHERNET |
POWER |
1Pull the fixing tab of the Toroidal ferrite core to open it.
2Make a loop around the core with the power cable of the M7.
3Attach the toroidal ferrite core to the M7 power cord as shown in the figure, and then press it until it clicks.
❚❚ Looping the power cable around the toroidal ferrite core
➧ ➧ ➧
•• Lift up to release the lock and open the core.
•• Make a loop around the core with the power cable.
NOTE
99It is better to attach Toroidal ferrite cores at each end of the cable, one close to the wall plug and another close to the terminal where it connects to the M7.
214444