AAAdding a HUB
An M7 and a HUB may not pair successfullly if the M7 and HUB are too far apart or are on different floors.
In such cases, you can link two HUBs together by setting the second HUB to Repeater mode. The additional HUB amplifies the signal and lets you pair the M7 to the closest HUB.
1Set the HUB that is connected to the wireless router to Pairing mode by pressing its SPK ADD button for 1 second.
2Plug in the new HUB you are using as an extender, and then press its SPK ADD button for 10 seconds.
3The newly added HUB’s LED indicators turn off and on, and it switches to Repeater mode.
4Once the connection between the two HUBs has been established, the added HUB’s ( ) indicator stops blinking.
M7
Used as a extender
NOTES |
|
99If your smart device is not connected to the wireless | HUB |
router with a |
|
on the Samsung Multiroom app. |
|
99Place the HUB that is in Repeater mode in an appropriate location between the M7 and the HUB that is connected to the wireless router.
99You can set only one HUB to Repeater mode.
AARelocating the M7
When relocating your M7, refer to the below table.
|
|
|
Wireless router | If you want to connect your M7 to the | If you want to connect your M7 to a |
HUB | current wireless router. | different wireless router. |
|
| Turn off the M7, relocate it, then establish |
Without a HUB |
| the new connection as described in the |
| Turn off the M7, relocate it and then turn | installation instructions on pages 23 |
| through 33. Press here | |
| it on. |
|
| Connect a LAN cable between the HUB | |
With a HUB |
| and the new wireless router, turn on the |
|
| HUB, and then turn on the M7. |
44344