FAQs (Frequently Asked Questions)
A:The FPadjust program generates alignment patterns that help you adjust monitor settings such
as Contrast, Brightness, Horizontal Position, Vertical Position Phase, and Clock for optimal performance.
Q:When I install my monitor, how do I get the best performance for the monitor?
A:
1.For best performance, make sure your display settings are set at 1280x1024@60Hz. Note: You can check the current display settings by pressing the OSD OK button once. The current display mode is shown at the bottom on the menu window.
2.To install the Flat Panel Adjust (FPadjust) program located on the monitor setup disk or
3.Run FPadjust by double clicking the shortcut. Follow the instructions step by step to optimize image performance with your system's video controller.
Q:How do LCDs compare to CRTs in terms of radiation?
A:Because LCDs do not use an electron gun, they do not generate the same amount of radiation at the screen surface.
Q:What is the screen size enlarge function?
A:User want the best possible display quality regardless of the size of the image. However LCD
panel characteristics require some tradeoffs. For example, the 150P highest resolution is 1024x768. In other words, there are 1024x768x or786,432 pixels on this
Q:How can I adjust the screen?
A:The screen brightness may be adjusted using the Brightness control in the OSD. Scaling an image in this manner results in slight brightness "fuzziness" or distortion.
RETURN TO TOP OF THE PAGE
Compatibility with other Peripherals
file:///E/manual/english/150P/safety/saf_faq.htm (4 of 9) [12/13/1999 8:00:09 PM]