109S Product Information |
|
• Phosphor | P22 |
• Recommended display area | 14.0" x 10.4" / 355 x 265 mm |
• Maximum display area | 14.4" x 10.8" / 365 x 270 mm |
SCANNING
• Horizontal scanning | 30 | - 92 KHz |
• Vertical scanning | 50 | - 160 Hz |
VIDEO
• Video dot rate | 158 MHz | |
• Input impedance |
| |
- Video | 75 ohm | |
- Sync | 2.2 kOhm | |
• Input signal levels | 0.7 Vpp | |
• Sync input signal | Separate sync | |
Composite sync | ||
| ||
• Sync polarities | Positive and negative |
WHITE COLOR TEMPERATURE
Chromaticity CIE coordinates: |
| |
• at 9300 | degrees K | x = 0.283 / y = 0.297 |
• at 6500 | degrees K | x = 0.313 / y = 0.329 |
sRGB
sRGB is a standard for ensuring correct exchange of colors between different devices (e.g. digital cameras, monitors, printers, scanners, etc.)
Using a standard unified color space, sRGB will help represent pictures taken by an sRGB compatible device correctly on your sRGB enabled Philips monitors. In that way, the colors are calibrated and you can rely on the correctness of the colors shown on your screen.
Important with the use of sRGB is that the brightness and contrast of your monitor is fixed to a predefined setting as well as the color gamut. Therefore it is important to select the sRGB setting in the monitor's OSD.
To do so, open the OSD by pressing the OK button on the front of your monitor. Use the down button to go to Color temperature and press OK again. Then move the down button to go to sRGB and press OK again.
Exit this OSD.
After this, please don't change the brightness or contrast setting of your monitor. If you change either of these, the monitor will exit the sRGB mode and go to a color temperature setting of 6500K.
file:///D/Rita/LF3/lf3manual/english/109S/PRODUCT/PRODUCT.HTM (6 of 9) [2002/7/10 ?? 02:45:44]