Philips BDS4241R Remote Management, Swapping the audio of the main or sub-picture, PIP Settings

Page 35

User Manual BDS4241R

Swapping the main picture and the sub-picture Press the SWAP button.

The main picture and the sub picture are interchanged. It is available in PIP and PBP mode only.

Sub Input
Main Input	SCART 1	SCART 2	VIDEO	S-VIDEO
Main Input
TV	X	X	X	X
SCART 1	X
SCART 2		X
VIDEO			X
S-VIDEO				X
COMPONENT	X	X	X	X
RGB	X	X	X	X
DVI	X	X	X	X

Swapping the audio of the main or sub-picture

Press the A.SWAP (Audio SWAP) button repeatedly.

You can hear the audio of the main or sub-picture alternately. It is available in PIP and PBP mode only.

Selecting the main picture or the sub-picture

Press the S.SELECT button repeatedly.

You can select the main or sub-picture alternately and adjust the status of selected picture.

It is available in PIP and PBP mode only.

PIP Settings

Sub Input
Main Input	SCART 1	SCART 2	VIDEO	S-VIDEO
Main Input
TV
SCART 1	X
SCART 2		X
VIDEO			X
S-VIDEO				X
COMPONENT
RGB
DVI

“” Max. : 480p, 576p, 1024x768/60Hz

In the PIP mode, the sub input source is differently defined

for the default value (scart1 or scart2) depending on your PDP model.

6.14REMOTE MANAGEMENT

This display can be managed remotely through the RS232 9-pin port, by using a Serial Interface Communication Protocol (SICP).

The specifications of the SICP protocol can be found in a separate document, called "SICP User Manual".

35

Image 35

Contents Page Table of Contents Limited Warrantyeur Safety Instructions Important Notes and Safety InstructionsPage Know These Safety Symbols END-OF-LIFE Disposal Cleaning & CareUnpacking Unpacking and InstallationPackage Contents Installation Notes Front View Parts and FunctionsRear View Remote Control General Functions Text Inserting the Batteries in the Remote ControlTeletext Function Buttons Connections to External Equipment Connecting to AN AerialUsing S-VIDEO Input Using DVI Input Using Component Video InputUsing Video Input Using Monitor OutputExternal Audio Connection Connecting External Speaker How to Set up Your PC for Use with PDP Windows Connecting a PC Using RGB VGA or DVI Video InputSetting Up Your Display Using Plug and Play Basic Functions Powering on / OFFSelecting Signal Source Using Front Panel or Remote ControlMute Volume AdjustmentUsing Remote Control Display Information Via Remote ControlTV Channel Controls Storing TV Channels Automatically Advanced FunctionsMono a Storing TV Channels ManuallyFine Tuning TV Channel Reception Labeling the TV Channels Choosing a MTS Multi-Channel Television Sound Mode Changing channels Editing TV ChannelsDeleting unwanted channels Reset to the Factory Defaults Picture Controls Adjusting Picture SettingsTreble Bass -Balance Sound Controls Adjusting Sound SettingsOSD Menu Language Power Save ModeFreezing the Current Picture ON-SCREEN Display TimeoutAdjusting the Menu Transparency Minimize Screen StickingAuto Fill ALL Fill Aspect Zoom Anamorphic *WIDE Setting UP the PC InputAdjusting the PC screen automatically Changing the Screen SizeDisplay Teletext index Accessing TeletextTeletext Select a specific TeletextSubtitles Selecting a location of the sub-picture Selecting a PIP modeViewing the Picture in Picture PIP Normal PIP PBPSelecting the main picture or the sub-picture PIP SettingsRemote Management Swapping the audio of the main or sub-pictureHdtv Resolution Input ModeVGA Resolution Sdtv ResolutionPage Display Technicals Specifications/ Out Terminals Internal Speaker Option GeneralEnvironment Condition External Speaker OptionCabinet Cleaning Instructions Cleaning and TroubleshootingCleaning Front Panel Cleaning InstructionsSymptom Possible Cause Remedy TroubleshootingTwo Year Free Labor Two Year Free Parts Limited Warranty EURWhat is COVERED? What is EXCLUDED?Where is Service AVAILABLE? Remember